CONFIRM THE PART FITS

Washer Damper DC97-16350K

Part #DC97-16350K

Online Only Price
$40.36
13% OFF Phone Price : $46.36
In Stock
For ZIP codes near Edit
60-day return policy
This part fits

Part Information

This damper (part number DC97-16350K) is for washers.

Damper DC97-16350K is a shock absorber that minimizes tub vibration in the spin mode.

Unplug the washer before installing this part. Wear work gloves to protect your hands.

Reviews

Easy install
December 27, 2022

Just a screwdriver to remove the cover, for these dampers to be replaced.

Angel, Puerto Rico

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
Less than 30 minutes
Damper Install
August 29, 2021

Much longer than anticipated to install due to need to remove bolts from side of the top piece of washer. No videos showed these extra bolts. Once top is off it's not too bad. The last damper is harder to replace because the drum is much stiffer with the previous 3 dampers replaced. Washer works perfectly after this job.

Bill, NE Ohio

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
1 - 2 hours

Yes, I would recommend this to a friend

fast delivery and fixed my washer problem
November 01, 2020

I have the Samsung washer but with the letter K at the end of the serial number. The item fixed my washer problem and works great. Pretty easy to install and Sears has the cheapest price online. Fixed my unbalance washer that just keeps giving out error code towards the end of cycle and never drain totally

Verygooddesigner, Ca

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

This was an easy install
September 02, 2018

I watched the YouTube video how to do this and its was pretty simple, I did it by myself with no one holding the lid for me. It would have been even easier with someone to hold the top, or a stick to hold the top, but still an easy fix and much cheaper than paying a repairman to come our.

Godlovesyou1980, San Diego

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes
Easy and fixed my problem.
August 14, 2018

My washer was getting off balance during the spin cycle with nearly every load. I ordered four new damper bars and replaced them all in about twenty minutes. I haven't had a problem with spin cycle since.

Hayfieldlee, Indiana

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour
Installing Dampers
February 01, 2018

Easy to take apart and replace. Parts did not seem to be stiff enough as it did not make situation better, actually think it was just as bad.

Spanky, South Carolina

1 person thought this review was helpful.

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour