Washer Drum Shaft Assembly W10811956

Cure dreaded "JET" noise spin cycle, washer is nice and quiet

Also need: W11032711 Washing Machine Washer - hard rubber coated ring pressed into the bottom of tub prevents leaks. Removed old washer with a few taps on a small screw driver, used scrap 2x4 and hammer to reseat new washer.

TB123A Washer Spanner Wrench to remove the "washer spanner nut". I used an air chisel as the spanner wrench I ordered would not work.

Had issues removing basket, to remove cut a 2x4 to fit in basket drilled a 0.5" hole in the middle. used a 36" - 1/2 threaded rod, placed a nut on the bottom to rest on the old shaft, fender washer/nut under the 2x4, nut at the top of the rod, washer and nut. which was used to "lock and drive the rod". Used an opened end wrench on the nut below the 2x4, used a ratchet to turn the nut on the top forcing the 2x4 Up and basket off the shaft.

I pressure washed basket, tub and cleaned waste water line. While reassembling I adjusted tub to be in the center of cabinet as it was leaning prior. Once washer is reassembled follow instructions included in Drum Shaft Assembly to "recalibrate" system, this rebalances the tub

Part does not come with slider (goes by various names) so be sure to order that if you need it. Great part so far. Zero issues with this. Quick delivery. Legit. Thank you.

Have cabrio washer that sounded like a jet taking off in my basement, looked up parts on other sites. They all showed a bearing kit. When I went to make the repairs it was not a bearing kit that fit this washer, this washer takes a drum shaft and gear assembly. But after getting the right part from searsparts it went smoothly, easy for me to install, if you've not done any sort of appliance repair it will probably take a few hours.

Does not come with plastic gear on bottom, so had to transfer from original. Mini needle nose to pry off split ring. Also had a spacer on the top that original didn’t so was unnecessary.

Part arrived quickly and in good packaging. Was cheaper also then anywhere else. Will be back soon when I need more parts.

Pulling the old one out took a while, had to watch a YouTube video for help, but the new one went right in with no problems.

Shipped quickly and worked great. We had to pull the gear off of the bottom of the old one and put on this one, but it was pretty easy.

Very easy pulling the drum was hard. It run runs very quite now