Craftsman 536797513 edger Parts

A Craftsman lawn edger like model 536797513 is designed to cut a clean, defined edge along sidewalks, driveways, and garden beds. It trims overgrown turf at the border so your lawn lines look straight (or smoothly curved) and professionally finished.

What you use it for

• Creating crisp edges along concrete or pavers
• Cutting back grass that creeps into flower beds
• Defining curved borders around landscaping
• Touching up after mowing and trimming
• Keeping mulch and soil lines neat and contained

How an edger works (quick overview)

Most edgers use a blade positioned vertically (or near-vertical) to slice the turf edge. On many Craftsman edgers, the cutting depth and tracking are controlled by the handle and wheel setup.

Task	What the edger does	Result
Sidewalk/driveway edging	Cuts a narrow trench at the turf line	Sharp, straight border
Bed edging	Trims grass runners at the bed edge	Cleaner bed outline
Curved borders	Follows a marked curve	Smooth, consistent arc

Parts that affect edging performance

If the edger is not cutting cleanly or is hard to control, these common wear or adjustment areas matter most:

• Blade guard alignment and clearance (helps keep debris controlled)
• Belt condition and tension (on belt-driven designs)
• Wheel tracking and axle condition (keeps the cut straight)
• Handle depth control components (sets consistent cutting depth)

For model 536797513, examples of parts you may see referenced during maintenance include the blade guard 336555MA and the v-belt 32668MA.

Why it matters

A properly edged lawn does more than look good; it also reduces trimming time, helps prevent grass from spreading into beds, and makes mowing lines easier to maintain week to week.

Last updated: February 2026

For the Craftsman lawn edger model 536797513, the exact engine make and displacement depend on the specific engine installed on your unit (it is identified on the engine label, not by the edger model number alone). We recommend matching parts and service info using the engine’s model-type-code, then confirming fit to 536797513.

How to identify the engine on your 536797513 edger

Look for an engine ID label or stamping on the engine itself (not the handle or deck). Common locations include the recoil starter housing, valve cover area, or near the muffler.

• Clean the label area so the numbers are readable
• Write down the full engine identification (often model, type, and code)
• Use that engine ID when buying engine parts (carburetor, air filter, spark plug)
• Use the edger model 536797513 when buying chassis and drive parts (belt, guard, hardware)
• If the label is missing, compare key features (shaft orientation, mounting pattern, pulley setup)

Parts on the edger that are not the engine (but affect performance)

If the edger runs but the blade does not spin or the drive feels weak, the issue is often in the belt and pulley system, not the engine.

Symptom	Common non-engine cause	Example part for 536797513
Engine runs, blade will not turn	Worn or broken belt	V-belt 32668MA
Squeal or slipping under load	Pulley wear or misalignment	Half pulley 305634MA
Excess vibration near blade area	Missing/loose guard or hardware	Blade guard 336555MA

Why it matters

Craftsman edgers can use different engine families across production runs, and engine parts are matched to the engine’s ID, while edger drive and frame parts are matched to 536797513. Using both IDs prevents ordering the wrong tune-up or drive components.

Last updated: February 2026

For Craftsman lawn edger model 536797513, we recommend buying replacement parts from a trusted parts seller that matches parts by model number. Sears PartsDirect is a reliable option for model-specific diagrams and exact-match parts like belts, guards, and hardware.

Best places to buy Craftsman parts

• Sears PartsDirect: best for model-based lookup and parts diagrams for 536797513
• Craftsman: good for current-production parts and accessories
• Lowe’s: common source for Craftsman parts and service items
• Local small-engine or lawn equipment shops: helpful for cross-referencing older equipment
• Major online retailers: useful for common hardware, but confirm fit by model number

How to make sure you get the right part

Use these checks before you order:

• Match the model number exactly: 536797513
• Compare the part name and identifier to what your edger uses (belt, blade guard, axle, fasteners)
• If you are replacing a drive component, inspect related wear items at the same time (belt, pulleys, fasteners)
• For older equipment, confirm whether the part is OEM-equivalent and intended for your Craftsman edger series

Examples of model-matched parts for 536797513

What you are fixing	Example part to look up	Why it helps
Edger will not drive or slips	V-belt 32668MA	A worn belt can slip, squeal, or stop driving the blade/drive system
Debris protection around blade	Blade guard 336555MA	A damaged guard can reduce protection and allow more debris to escape
Loose wheel or tracking issues	Wheel axle 310716MA	A bent or worn axle can cause wobble and uneven edging

Why it matters

Craftsman parts are often shared across multiple product lines, and small differences in hardware, belt length, or guard style can change fit. Matching by 536797513 helps you avoid returns and gets your lawn edger running correctly the first time.

Last updated: February 2026