Craftsman 217586751 7.5-hp outboard motor Parts

Most boats use the same standard names for major sections and hardware; for a Craftsman 217586751 7.5-hp outboard motor setup, these terms help you identify what you’re looking at and describe the right area when troubleshooting steering, propulsion, or hull-related issues. See how to find your appliance model number (and what it means for parts) for tips on confirming the exact model before ordering.

Common boat directions and main sections

• Bow: front of the boat
• Stern: rear of the boat
• Port: left side when facing forward
• Starboard: right side when facing forward
• Hull: main body that floats
• Deck: top surface you stand or sit on

Key structural and control parts (plain-language definitions)

• Transom: flat rear wall where many outboard motors mount
• Keel: center “spine” along the bottom that helps tracking and stability
• Gunwale: top edge of the hull sides
• Helm: steering station (wheel/tiller, controls, gauges)
• Rudder (on inboard/sail boats): steering blade in the water (many small outboards steer by turning the motor instead)

Propulsion parts you’ll hear most often

Part	What it does	Why you care
Propeller	Pushes water to move the boat	Damage causes vibration, poor speed, and cavitation
Skeg	Fin below the prop area	Protects the lower unit and helps tracking
Throttle/shift controls	Set speed and gear	Misadjustment can cause hard shifting or stalling

Why it matters when you’re buying parts

Using the correct terms helps us match the right boating parts category (for example, transom mounting hardware vs. propeller hardware) and speeds up diagnosis when you describe symptoms like “vibration at the stern” or “pulling to port.”

Last updated: February 2026

You can get replacement parts for your Craftsman 217586751 7.5-hp outboard motor from Sears PartsDirect and other authorized retailers; the key is matching the exact model number and confirming the engine manufacturer so the part fits and performs correctly.

Best places to buy Craftsman parts

• Sears PartsDirect (search by model number 217586751 for boating parts diagrams and part lookups)
• Craftsman’s official parts channels (when available for your product line)
• Major retailers that carry Craftsman parts (online and in-store)
• Marine and small-engine parts suppliers (helpful for ignition, fuel, and cooling components)
• Reputable aftermarket sellers (use extra care to match specs)

What to confirm before you order (to avoid wrong parts)

For outboard motors, “Craftsman” is the brand on the product, but many engine components are built by an engine manufacturer. Before ordering, we recommend confirming:

• Exact model number: 217586751 (use the full number, not a partial)
• Engine ID tag details: model, serial, and sometimes a code for the engine maker
• Part category: fuel system, ignition, recoil starter, lower unit, cooling, controls
• Electrical specs: voltage, connector style, wire gauge (when applicable)
• Mounting and fit: bolt pattern, shaft length, gasket shape

Quick comparison: OEM vs aftermarket

Option	Best for	What to watch
OEM/authorized	Direct-fit replacements	Availability and price
Aftermarket	Cost savings, older models	Verify dimensions, materials, and return policy

Why it matters

Using the correct part for a 7.5-hp outboard motor protects reliability and safety on the water; mismatched fuel or ignition parts can cause hard starting, stalling, or overheating.

Helpful related resource

If you are unsure you are using the full, correct identifier, use our guide: how to find your appliance model number (and what it means for parts).

Last updated: February 2026

A Craftsman 217586751 7.5-hp outboard motor typically lasts 10 to 15 years with normal recreational use and consistent maintenance (fresh fuel, correct oil mix if applicable, cooling system care, and corrosion prevention). Heavy saltwater use and poor storage shorten lifespan.

What most affects lifespan

• Maintenance frequency: regular tune-ups, gearcase service, and cooling checks
• Fuel quality and storage: stabilized fuel, clean tank/lines, drained carburetor for storage
• Operating conditions: saltwater exposure, sand/silt, overheating events
• Usage pattern: long wide-open-throttle runs vs. moderate cruising
• Winterization and storage: fogging, flushing, dry storage, covered ventilation

Quick maintenance schedule (typical)

Interval	What to do	Why it matters
Every outing	Check telltale stream, inspect prop, look for fuel leaks	Prevents overheating and damage
Every season	Replace spark plug(s), inspect fuel lines, clean/inspect carburetor	Improves starting and protects the powerhead
Annually	Change lower unit gear oil, inspect water pump impeller	Prevents gear wear and cooling failure
Before storage	Stabilize fuel, fog cylinders, flush cooling passages	Reduces corrosion and varnish buildup

Signs your motor is nearing end-of-life (or needs major service)

• Low compression, hard starting, or frequent plug fouling
• Overheating, weak telltale, or repeated impeller failures
• Metal flakes or milky oil in the lower unit gear oil
• Persistent fuel leaks, cracked hoses, or carburetor flooding
• Excessive corrosion around fasteners, mounts, or exhaust housing

Why it matters

Outboard lifespan is driven more by cooling, lubrication, and corrosion control than by age alone. Staying ahead of water pump and gearcase service prevents the most expensive failures.

For help confirming the correct model identification before ordering maintenance items, use [how to find your appliance model number (and what it means for parts)].

Last updated: March 2026