Kenmore 329347200 undersink housing filter Parts

Kenmore model numbers are typically a string of numbers (and sometimes letters) that identify the exact product version; for Kenmore appliances, the first three digits are commonly used as a prefix that points to the original manufacturer, followed by additional digits that narrow down the exact model and variation.

Most Kenmore model numbers follow a predictable pattern that helps us match the right parts and diagrams.

• Starts with a 3-digit prefix (often used to identify the manufacturer behind the Kenmore brand)
• Followed by additional digits that identify the base model
• Ends with variation digits/characters that reflect specific features or revisions
• Usually found on a model tag/label on the product
• The exact format can vary by product type (refrigerator, washer, water treatment, etc.)

Here is a simple way to think about the structure:

For your Kenmore 329347200 undersink housing filter, using the full model number helps us pull the correct parts breakdown and avoid ordering a look-alike filter housing component that will not seal, mount, or connect correctly.

• Copy the model number exactly as shown on the label
• Include any letters and trailing digits (they can change fit)
• If you are comparing two similar Kenmore products, match the entire model number, not just the first few digits
• When searching beyond the parts list for this model, use Sears PartsDirect to search by the full model number
• Use our guide: how to find your appliance model number (and what it means for parts)

Last updated: February 2026

Most faucet and under-sink style water filters like the Kenmore 329347200 typically last about 2 to 6 months in normal household use (or roughly 100 to 300 gallons, depending on water quality and usage). For best taste and flow, replace the cartridge as soon as performance drops.

Filter life depends mainly on how much water you run through it and how dirty your incoming water is.

• Light use (1 to 2 people): about 4 to 6 months
• Average use (family): about 2 to 4 months
• Heavy use or poor water quality: about 1 to 3 months
• If you notice a big flow drop: replace sooner (clogged media)
• If water tastes or smells “off”: replace sooner (capacity reached)

A filter can be “used up” even if it still passes water.

• Slower flow at the filtered faucet (not the unfiltered side)
• Water tastes flat, metallic, or has chlorine taste again
• Odors return after filtering
• More frequent air spurts or sputtering at the filtered tap
• You have to run water longer to get the same taste

Use this quick check to avoid replacing the wrong part.

Replacing on time protects water taste and keeps the filter media from clogging so badly that it restricts flow. It also helps your under-sink housing filter seal correctly by reducing pressure spikes caused by a plugged cartridge.

We recommend matching by model number (329347200) and the exact filter cartridge style used in your housing. You can search by model on Sears PartsDirect to find the correct replacement.

Last updated: February 2026

To identify the correct water filter for your Kenmore refrigerator, we match the filter to your refrigerator’s model number, not the filter housing. Even if you see common Kenmore filter numbers (like 9081 or 9083), the refrigerator model number is what ensures the right fit and leak-free connections.

Look for the model number on the refrigerator’s rating label. Common locations include:

• Inside the fresh food compartment on a side wall
• On the ceiling of the fresh food compartment
• Inside the door jamb area
• Behind the crisper drawers (on some models)

Once you have the model number, use it to search and confirm the exact filter that fits.

Kenmore refrigerators were produced by multiple manufacturers over the years, so the “Kenmore” filter number on the box is not always the most reliable way to match.

Here’s how the identifiers typically relate:

Use these checks to avoid ordering the wrong refrigerator water filter:

• Confirm whether your filter is inside the refrigerator (upper right, grille, or base grille) or in-line behind the unit
• Compare the end connections (twist-lock tabs vs. push-in with O-rings)
• Check if your current filter has a bypass plug installed instead of a cartridge
• If your dispenser flow is slow, replace the filter first, then flush 2 to 3 gallons of water
• After replacement, reset the filter indicator (if your refrigerator has one)

Using the correct filter protects water taste and flow rate, and it prevents common issues like leaks at the filter head, poor sealing at the O-rings, and a dispenser that sputters from trapped air.

This page is for Kenmore model 329347200, which is a faucet water filter (undersink housing filter), not a refrigerator model. For refrigerator filters, search by your refrigerator’s model number on Sears PartsDirect. You can also use our guide: how to find your appliance model number (and what it means for parts).

Last updated: February 2026