Craftsman 917387360 rotary lawn mower Parts

On a Craftsman walk-behind mower like model 917387360, the model number is typically printed on a decal or tag on the mower deck (often near the rear discharge area) or on the rear housing near the height-adjustment area. Use the locations shown in the 917387360 owner's manual to match the exact number.

Where to look on a walk-behind mower

Check these common spots with the mower on a flat surface and the engine off:

• Top of the mower deck near the rear wheels
• Rear of the deck near the bagger door or discharge opening
• Side of the deck near the height adjuster or wheel bracket
• Handle support area near the lower handle mounts
• Under grass buildup; wipe the deck clean to reveal the decal

Tips to read the tag correctly

Model tags can be faded or covered by clippings and oil residue.

• Clean the area with a damp rag; avoid soaking decals
• Use a flashlight at an angle to make stamped numbers easier to see
• Write down the full model number exactly as shown (all digits)
• If a serial number is present, record it too for parts lookups

What the model number helps you get

The model number ensures you get the correct parts list and diagrams for your exact mower configuration.

What you need	Why it matters	Example for this mower
Model number	Matches the correct parts breakdown	917387360
Part ID	Identifies the exact replacement part	Lawn mower blade 532406713
Part number	Manufacturer reference used across brands	141114 (blade)

Why it matters

Craftsman walk-behind mowers can look similar across years, but blade style, control cables, and handle hardware can differ. Using the correct model number prevents ordering the wrong blade adapter, lock nut, or zone control cable.

Last updated: February 2026

For Craftsman rotary lawn mower model 917387360, use the model number to identify the correct parts diagrams; the serial number is a separate ID tag and its date-coding format varies by manufacturer and production run. Use the identification information in the 917387360 owner's manual and the numbers on your tag to interpret it correctly.

Where to find the model and serial tag

On walk-behind mowers, the model and serial information is usually on a label or stamped plate on the deck.

• Check the top of the mower deck near the engine mounting area
• Look at the rear of the deck near the grass catcher opening
• Inspect near the discharge chute area
• Clean off grass, oil, and dirt so every character is readable
• Copy the serial exactly (include letters, dashes, and leading zeros)

How to interpret what you see

Because Craftsman mowers were built by multiple manufacturers, the serial number format is not one universal pattern. Use these steps to decode yours:

• First, confirm you are reading the serial number, not the engine model number
• Next, look for obvious date cues (some tags group digits like MMDDYY or YYWW)
• If your tag includes letters, treat them as part of the code (they often indicate plant or line)
• Compare the tag layout and any “SERIAL” or “S/N” marking to the examples in the manual

Common number types you may see

Number on mower	What it identifies	What to use it for
Mower model number (917387360)	The mower platform	Parts lookup and diagrams
Mower serial number	The specific unit	Production run identification
Engine model number (example: 143.034502)	The engine	Engine-specific parts

Why it matters

Reading the correct number prevents ordering the wrong maintenance parts and hardware, especially when there are running changes across production runs.

Parts often selected by mower model (not serial)

For routine service on this mower, the model number usually gets you to the right part.

• Lawn mower blade 532406713 (deck blade)
• Lawn mower blade adapter 532418373 (connects blade to crankshaft)
• Husqvarna poulan lawn mower zone control cable 532168552 (operator control cable)

Last updated: February 2026

Common problems we see on the Craftsman 917387360 rotary lawn mower include poor or uneven cutting, loss of power, excessive vibration, and a starter rope that is hard to pull. These issues are usually tied to blade condition, grass buildup under the deck, or engine control and starting components; see the 917387360 owner's manual troubleshooting chart for model-specific checks.

Most common symptoms and what typically causes them

• Loss of power: cutting too much grass at once, dirty air filter, grass and debris packed under the deck, walking speed too fast
• Poor cut (uneven): worn or bent blade, uneven wheel height settings, debris buildup under the mower
• Excessive vibration: loose or damaged blade, bent crankshaft (often after striking a hard object)
• Starter rope hard to pull: blade dragging in grass, flywheel brake engaged when the control bar is released, damaged blade adapter
• Hard starting or stalling: fuel valve not ON (if equipped), spark plug issues, carburetor problems (fixed main jet on this model)

Quick checks we recommend first (safe, fast, and effective)

1. Tip the mower safely (spark plug wire disconnected) and remove packed grass from the underside.
2. Confirm all four wheels are set to the same cutting height.
3. Inspect the blade for bends, cracks, or looseness; replace if damaged.
4. Check the control bar and zone control cable for smooth movement and full engagement.
5. If the rope is hard to pull, inspect the blade adapter and blade mounting hardware.

Parts that commonly solve cutting and vibration complaints

Symptom	Most common fix	Example part for model 917387360
Uneven cut	Replace worn/bent blade	Lawn mower blade 532406713
Vibration	Replace blade and verify mounting	Lawn mower blade adapter 532418373
Rope hard to pull after impact	Inspect adapter and crankshaft	Lawn mower blade adapter 532418373

Why it matters

A worn blade or grass buildup forces the engine to work harder, which can cause loss of power and poor cut quality. A loose or damaged blade system can also create unsafe vibration and accelerate wear on the crankshaft and deck.

Last updated: February 2026

Craftsman is the brand name on your mower, and the actual manufacturer can vary by model and production era. For the Craftsman rotary lawn mower model 917387360, the 917 model prefix is commonly associated with mowers built for Sears by AYP (American Yard Products), a manufacturer tied to the Husqvarna group.

How to confirm who built your specific mower

The most reliable way is to match the model and parts list shown for 917387360 in the 917387360 owner's manual. That manual identifies the mower as a Craftsman rotary lawn mower and includes the repair parts breakdown for this exact model.

Use these checks:

• Verify the model tag reads 917.387360 (sometimes shown with a dot).
• Compare your handle, deck, and discharge guard to the illustrated parts pages.
• Match common service parts (blade, cable, knobs) to the parts list.
• If your mower has been rebuilt, confirm parts by fit, not just by appearance.
• Keep the model number handy when ordering parts or service.

What “Craftsman” means vs. who manufactures it

Craftsman is a brand that has been produced by different manufacturers over time. That is why two Craftsman mowers can look and service differently even though they share the Craftsman name.

What you see	What it tells you	Why it matters
Craftsman nameplate	Brand	Branding does not guarantee the same manufacturer across years
Model number prefix (like 917)	Manufacturing source clue	Helps narrow down parts diagrams and service procedures
Exact part IDs used on the mower	Fit confirmation	Ensures the replacement part matches your deck and controls

Why it matters when ordering parts

Manufacturer differences affect deck design, blade mounting, and control cables. For example, this model uses a 22-inch blade style; when replacing it, match by model and part ID such as the lawn mower blade 532406713 to avoid vibration, poor cut quality, or unsafe operation.

Last updated: February 2026

Craftsman model 917387360 is identified by its model number, not by a built-in “year” code. For this rotary lawn mower, the most reliable way to date it is to use the engine identification and date information shown in the 917387360 owner's manual, then match that to the engine’s manufacturing details.

How to find the mower’s build timeframe

On model 917387360, the mower deck and handle assembly use the mower model number, but the engine typically carries the clearest manufacturing identifiers.

• Locate the engine model and spec information on the engine shroud or label.
• In the manual, confirm the engine model listed for this mower (it shows engine model 143.034502).
• Use the engine’s date code or serial information (on the engine label) to determine the manufacturing year.
• If the engine has been replaced, date the mower by the mower’s purchase/ownership records instead.
• Keep the manual handy for correct part identification when servicing items like the blade, cable, and handle hardware.

What the manual tells us for model 917387360

The documentation for this mower identifies it as a Craftsman rotary lawn mower, model 917.387360, and lists the engine as Craftsman 4-cycle engine model 143.034502. That engine model reference is the key starting point for dating the unit using engine markings. See the 917387360 owner's manual for the model and engine listing.

Item you’ll check	Where to find it	What it helps you determine
Mower model number (917387360)	Mower housing/manual cover	Confirms the correct parts list and diagrams
Engine model (143.034502)	Manual and engine label	Points you to the engine’s ID system
Engine serial/date code	Engine label/stamp	Best indicator of manufacturing year

Why it matters

Knowing the correct timeframe helps us match the right replacement parts and diagrams for maintenance and repairs (for example, the correct 22-inch blade and blade mounting hardware). If you are servicing the cutting system, the lawn mower blade 532406713 is a common wear item for this model.

Last updated: February 2026