Craftsman 917376052 lawn mower Parts

For the Craftsman lawn mower model 917376052, we recommend using gasoline within 30 days unless you treat it with a quality fuel stabilizer; with stabilizer, most stored fuel stays usable for up to 6 to 8 months. Old fuel is a common cause of hard starting and rough running.

• Use a clean, approved gas can; replace the can if it starts to rust (rust and dirt cause fuel problems).
• Keep the can tightly sealed and store it in a cool, dry, well-ventilated area away from ignition sources.
• Label the can with the purchase date so you do not lose track of fuel age.
• If the mower will sit 30 days or more, plan storage steps so stale fuel does not become a starting issue.
• If the engine will not start and you suspect old fuel, drain the tank and refill with fresh gasoline (stale fuel is listed as a no-start cause in the troubleshooting section).

1. Safely drain the mower fuel tank into an approved container.
2. Refill with fresh, clean gasoline.
3. If starting is still difficult, follow the troubleshooting steps in the 917376052 owner's manual.

Stale fuel can cause no-start conditions, surging, and poor power. The manual specifically calls out stale fuel as a common reason the mower does not start, so keeping fuel fresh prevents avoidable downtime.

Last updated: January 2026

The model number is 917.376052; it’s the Craftsman rotary lawn mower identified in the 917376052 owner's manual. This number is the one to use when ordering walk-behind mower parts or matching diagrams and maintenance instructions.

We recommend confirming the model number directly on the mower so parts match correctly.

• Check the model tag or decal on the mower deck (top or side of the housing)
• Look near the rear discharge area and rear door
• Check around the handle mounting brackets
• Compare the tag to the model shown in the manual cover page

Craftsman walk-behind mowers can look similar across years, but parts can differ by model number.

If you are troubleshooting or doing routine maintenance, these are examples of parts that must match the model’s parts list.

• Lawn mower blade 532406713 (22-inch blade)
• Belt 532157769 (drive belt kit)
• Lawn mower drive control cable 532194653 (self-propel engagement)
• Lawn mower transmission assembly 532415226 (drive system)

Using the correct model number prevents ordering the wrong Craftsman lawn mower parts, reduces installation issues, and helps you follow the right maintenance schedule and safety instructions.

Last updated: January 2026

The most common issues we see on the Craftsman 917376052 walk-behind mower are drive system problems (self-propel not pulling), poor cutting (vibration or uneven cut), and rear discharge or bagging issues. Many of these trace back to normal wear items like the belt, blade, and drive wheel components listed in the 917376052 owner's manual.

• Self-propel quits or slips: worn or stretched drive belt, worn drive pawls, or a damaged drive wheel.
• Mower vibrates or cuts unevenly: bent/dull blade, loose blade hardware, or a worn blade adapter.
• Hard to pull or won’t roll smoothly: wheel dust cover damage, debris in wheel area, or worn bearings.
• Rear door won’t close or won’t stay shut: rear discharge chute door issues or spring/hinge wear.
• Drive control feels loose: drive control cable out of adjustment or worn linkage.

• Tip the mower safely (spark plug wire disconnected) and inspect the blade and adapter for damage.
• Check the drive belt for glazing, cracking, or slack.
• Inspect the drive wheels for worn tread and confirm the wheel drive “grab” is consistent.
• Verify the rear discharge door swings freely and seals reasonably well.
• Confirm cables move smoothly and are clamped/secured.

On a power-propelled 22-inch mower like the 917376052, a worn belt or drive pawl can make the mower feel “dead” even when the engine runs fine. A damaged blade or adapter can also create vibration that accelerates wear on fasteners, wheels, and the deck.

Last updated: March 2026