Goodman PGB024075-1 package gas Parts

A combined heating and cooling system (like a Goodman packaged gas unit such as model PGB024075-1) typically costs about $10,000 to $20,000 installed for many homes, with total price driven mostly by equipment size, ductwork condition, and installation complexity.

What drives the total installed price

Installed HVAC pricing is a bundle of equipment plus labor plus materials. The biggest cost factors usually include:

• System type and efficiency (packaged gas vs split system; higher efficiency costs more)
• Capacity and sizing (tonnage and BTU output matched to the home)
• Ductwork condition (repairs, sealing, resizing, or replacement)
• Electrical and gas line work (disconnects, whip, shutoff, sediment trap, venting)
• Permits and code-required upgrades (varies by location)
• Accessibility (roof curb, tight mechanical spaces, crane needs)

Typical cost ranges (what you can expect)

These ranges help set expectations for a packaged heating and cooling replacement.

Scenario	Typical installed range	What it usually includes
Like-for-like packaged unit swap	$10,000 to $15,000	Basic removal and replacement, minor materials
Replacement plus moderate duct or curb work	$13,000 to $18,000	Duct repairs, curb/adaptor, added labor
Complex install or major upgrades	$16,000 to $20,000+	Significant ductwork, electrical/gas changes, access challenges

Parts costs vs system costs (important distinction)

When a packaged unit is not heating or cooling, replacing a failed component can be far less expensive than replacing the entire system. For example, common repair-related parts for PGB024075-1 include the furnace inducer vent motor assembly B2959000S or the central air conditioner condenser fan motor B13400251S.

Why it matters

A correct diagnosis can prevent unnecessary replacement. If the issue is a single failed motor, capacitor, limit switch, or burner component, a targeted repair often restores safe operation at a fraction of full system cost.

If you are pricing a repair or replacement

We recommend these steps before committing to a full change-out:

• Confirm the exact model number on the unit data plate
• Identify whether the problem is cooling-only, heating-only, or airflow-related
• Check for obvious airflow restrictions (dirty filter, blocked returns, closed registers)
• Compare repair options using the parts list for PGB024075-1, then search broader inventory on Sears PartsDirect

Last updated: February 2026

A Goodman gas furnace in a packaged unit like model PGB024075-1 typically lasts 15 to 20 years. Regular maintenance (clean airflow, correct gas combustion, and healthy motors and controls) is what most directly determines whether you land closer to 15 years or push past 20.

Typical lifespan ranges (what to expect)

Most homeowners see these timeframes when the system is installed correctly and serviced regularly:

• Gas furnace heat section: 15 to 20 years
• Blower motor and inducer components: often 8 to 15 years
• Electrical controls (transformer, switches): often 10 to 20 years
• Outdoor fan motor and capacitor-related parts: often 7 to 15 years

What shortens or extends furnace life

These are the most common factors that change lifespan on a Goodman packaged gas unit:

• Dirty filters or restricted return air (overheats the heat exchanger and stresses the blower)
• Blocked flue or venting issues (stresses the inducer and safety controls)
• Overheating trips from poor airflow (can involve a limit switch)
• Frequent short cycling (extra wear on ignition and motors)
• Coastal corrosion or water intrusion (accelerates cabinet and component damage)

Parts that commonly show wear first (and why)

If your unit is aging, these parts are often involved in “no heat,” “no cool,” or shutdown symptoms:

Symptom	Common area	Example part on this model
Heat shuts off, then restarts	Overheat protection	Limit switch, 180-degree 1370901S
Draft/vent problems, pressure switch errors	Inducer system	Furnace inducer vent motor assembly B2959000S
Weak airflow or noisy air handler	Blower assembly	Central air conditioner air handler blower motor B13400313S

Why it matters

Knowing the expected 15 to 20 year lifespan helps you decide whether to repair or plan ahead. On an older PGB024075-1, replacing a failed motor or safety switch can restore reliable operation, but repeated failures often signal broader wear from heat, vibration, or airflow restriction.

Ordering the right replacement parts

We recommend matching parts by your exact model number (PGB024075-1) and the symptom you are seeing. You can order parts from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Common problems we see on Goodman package gas units like model PGB024075-1 include no cooling, weak airflow, outdoor fan issues, nuisance shutdowns in heat mode, and electrical failures. Many are caused by airflow restrictions, dirty coils, or failing motors and capacitors.

Most common symptoms and what they usually mean

• Not cooling or short cycling: dirty condenser coil, low airflow, failing run capacitor, or a condenser fan problem.
• Weak airflow indoors: clogged filter, blocked return/supply vents, or a failing blower motor/wheel.
• Outdoor fan not running: bad fan motor, bad capacitor, or wiring/connection issues.
• Heat shuts off quickly: limit switch opening from overheating (often airflow related).
• No heat or rough ignition: inducer/venting problems, burner issues, or restricted airflow.

Parts that commonly fail on this model

If your symptoms match, these are common replacement candidates for the Goodman PGB024075-1:

• Central air conditioner condenser fan motor B13400251S (fan not running, overheating, loud motor)
• Overload CAP050300440RSP (hard starts, intermittent compressor operation)
• Central air conditioner air handler blower motor B13400313S (weak airflow, motor hums, no indoor air)
• Central air conditioner limit switch, 180-degree 1370901S (heat trips off, unit overheats)
• Furnace inducer vent motor assembly B2959000S (no heat, pressure/venting related shutdowns)

Quick checks we recommend before replacing parts

• Set thermostat to COOL, lower setpoint 3 to 5 degrees; confirm the unit starts and stays running.
• Replace/clean the air filter; confirm all supply and return vents are open.
• Inspect the outdoor coil for dirt and debris; gently clean the fins.
• Listen for motor hum (fan or blower) without rotation; that often points to a capacitor or motor issue.
• Check for a tripped breaker or blown disconnect fuses (reset once; repeated trips indicate a fault).

Symptom-to-part cheat sheet

Symptom	Most likely area	Common part on this page
Outdoor fan not spinning	Condenser section	Condenser fan motor
Weak airflow inside	Air handler section	Blower motor or blower wheel
Heat stops, then restarts	Safety/overheat	Limit switch
No heat, inducer won’t run	Draft/venting	Inducer vent motor assembly

Why it matters

Airflow and electrical issues can cascade: a dirty filter or weak blower can overheat the heat section and trip the limit switch, and a failing condenser fan can drive head pressure up and stress the compressor. Fixing the root cause prevents repeat failures.

For ordering, you can buy replacement parts from the parts list for model PGB024075-1, or search by model on Sears PartsDirect.

Last updated: February 2026