Craftsman 917253520 36" mower replacement kit Parts

Yes, many Craftsman and Husqvarna parts interchange on riding mower decks, especially on Craftsman models like 917253520 that commonly share AYP-style deck designs. The only reliable way to confirm fit is to match the exact part ID or manufacturer part number for your specific deck and revision.

• Match the model number exactly: 917253520
• Compare the part ID and part number on the parts list
• Verify the part’s location and function (deck hardware vs. spindle vs. belt routing)
• Check for deck size and configuration differences (36-inch decks can still vary by hanger style)
• Replace deck hardware in sets when wear is uneven (nuts, washers, retainers)

On mower decks, the most commonly interchangeable items are basic hardware and wear items. For this model’s deck kit, examples include:

• Nut 596322601
• Washer 819111416
• Spring retainer 532004921
• Skid 583767801

Deck parts that look identical can still differ in thread pitch, offset, or mounting geometry. Using the exact matched part ID helps prevent stripped threads, misalignment, uneven cutting, and premature belt or spindle wear.

Last updated: February 2026

Craftsman model 917253520 is a 917-series riding mower/tractor platform that was sold across multiple production years, so the model number alone does not map to one single year. We identify the exact build year by using the serial number/date code on the tractor’s ID tag.

Look for the model and serial tag in one of these common locations:

• Under the seat pan (lift the seat)
• On the rear fender area near the seat
• On the frame rail near the engine
• Near the footrest area on the chassis

Once you find the serial number, use these steps:

• Write down the full serial number exactly as shown
• Look for a date code embedded in the serial number (many Craftsman/Husqvarna-built units use a date-coded format)
• If the tag shows a month and year directly, use that as the build date
• If the tag shows only a serial, use the date-coded portion to determine the year

The 917 prefix identifies a manufacturing family used for many years, and the same model number can appear with running changes (deck hardware, belt routing, idlers, and fasteners). The build date helps us match the correct complete deck parts and hardware.

If you are working on the 36 inch deck hardware while you confirm the build date, these common items are available for this model’s complete deck listing:

• Nut 596322601 (fastener used in multiple deck locations)
• Washer 819111416 (spacer/washer used with deck hardware)
• Spring retainer 532004921 (retains tension springs on linkages)
• Skid 583767801 (deck wear skid)

Ordering the right belt, spindle, or linkage hardware depends on the exact configuration used in your production run. Confirming the build year from the serial tag prevents mismatches and repeat repairs.

Last updated: February 2026

You can buy replacement parts for your Craftsman model 917253520 (36" mower replacement kit) directly from the parts list for this model, which helps ensure the part fits your complete deck. For common deck hardware, we also list in-stock items like the nut 596322601 and skid 583767801.

Using the model-specific parts list is the most reliable approach because deck hardware and mounting points can vary by revision.

• Match your model number exactly: 917253520
• Identify the part by name and diagram location (if shown)
• Confirm quantity needed (many deck fasteners are used in sets)
• Replace worn hardware in pairs or sets when possible
• Keep your old part to compare size, thread type, and finish

These are examples of parts available for this model that are often needed during deck service or rebuild work:

Buying parts that are listed for Craftsman 917253520 reduces the risk of ordering the wrong thread size, incorrect spacing hardware, or a deck skid that does not align with your mounting holes. That saves time and helps your riding mower deck run level and safely.

Last updated: February 2026

For Craftsman riding mower and deck parts, the model number (like 917253520) identifies the exact product family and parts breakdown; it is not a date code. Use the full model number to match the correct diagrams and replacement parts for your Craftsman 36" mower replacement kit.

Craftsman model numbers are used for parts identification, not for decoding the build date.

• Model number (example: 917253520): used to look up the correct parts list and diagrams
• Product type/category: helps narrow to the right section (deck, drive, steering, etc.)
• Build date: typically found on a separate serial number or product ID label, not in the model number itself

On most Craftsman riding mowers and decks, the model/serial label is commonly located in one of these places:

• Under the seat on the frame
• On the rear frame plate near the hitch area
• On the underside edge of the hood or near the dash tower
• On the mower deck shell (often near a belt cover or discharge chute area)

Once you confirm the label reads 917253520, use that exact number to select parts that fit your complete deck.

If you’re servicing the deck and missing fasteners or wear items, these are examples of parts listed for this model:

• Nut 596322601 (common for securing deck components)
• Washer 819111416 (helps prevent loosening and wear)
• Spring retainer 532004921 (used to hold springs in place)
• Skid 583767801 (helps protect the deck edge from scraping)

Using the correct Craftsman model number keeps you in the right parts breakdown for your deck; that reduces returns, prevents fit issues, and helps you get the mower cutting evenly again.

Last updated: February 2026