King-Craft Air compressor Parts — Browse All Models

Common King Craft air compressor parts that you may need to replace

• Pressure switch. The pressure switch turns the compressor on and off to regulate the tank air pressure.
• Safety valve. Attached to the manifold, the safety valve pops open to relieve excessive air pressure when the pressure switch fails to shut off the pump at the cut-out pressure setting.
• Unloader. The unloader is a valve installed between the pump and tank that opens to release pump head pressure when the compressor stops, enabling the compressor to restart easier.
• Valve plate. Fixed above the cylinder, the valve plate controls air movement into and out of the cylinder to compress the air.
• Check valve. Attached to the air tank inlet, the check valve prevents air from back flowing to the pump from the tank when the pump stops.

King Craft air compressor safety tips

• Always wear a safety mask or respirator when using air tools or compressed air for cleaning.
• Work in a clean, dry, well-ventilated area.
• Never directly inhale compressed air. It isn't suitable for breathing.
• Don't leave air tools unattended with the air hose attached.
• Don't use inflator nozzles for dusting and cleaning.
• Check conditions of hoses and fasteners before each use. Replace the air hose if damaged. Tighten any loose fasteners before using the air compressor.