Can’t find your part?   Contact us:+1-309-603-4777
Sears Parts Direct
Tips to find your model number
Orders

  • Keep track of the models you own in your profile

    Sign in or Register to view or add models

Schedule a repair
Rinnai Space heaters

Official Rinnai space heater parts

Sears PartsDirect is a leading supplier of Rinnai space heater replacement parts in the United States. Whether it's a thermostat or power switch that you need to fix your Rinnai space heater, we're bound to have the repair parts you need to get your heater working again.

Replacing the fan blade in a Rinnai space heater

  • Unplug the space heater to disconnect electrical power. Wear work gloves to protect your hands during the repair.
  • Remove the fan cover mounting screws and pull the fan cover off.
  • Disconnect the fan motor wiring harness.
  • Remove the fan mounting screws and pull the fan out.
  • Loose the fan blade set screw. Remove the fan blade from the motor shaft.
  • Install the new fan blade on the fan motor shaft and tighten the fan blade set screw.
  • Mount the fan in the fan housing. Connect the fan wire harness to the fan motor.
  • Reinstall the fan cover and plug the fan power cord back into the electrical outlet to restore power to the fan.

Safety instructions for your Rinnai space heater

  • Carefully follow all installation instructions to properly and safely install the space heater in a suitable location.
  • Only mount the heater in a vertical position. Don't attempt to mount the heater horizontally.
  • Mount the heater at least 6-inches above the floor and no closer than 12-inches from the adjacent wall.
  • Don't mount the heater over a bathtub or shower stall enclosure.
  • Don't block the wall heater by mounting it under a towel rack or behind a door.
  • Read and follow all operating and safety instructions in the owner's manual.

Parts & More