Can’t find your part?   Contact us:
+1-309-603-4777
Sears Parts Direct
Orders

  • Keep track of the models you own in your profile

    Sign in or Register to view or add models

Schedule a repair
Fisher & Paykel Gas cooktops

Official Fisher & Paykel gas cooktop parts

When your Fisher & Paykel gas cooktop isn't heating as it should, you'll need repair parts from Sears PartsDirect to fix the problem. Fisher & Paykel gas cooktops typically heat consistently well all the time but parts can break or wear out on your cooktop. We have the replacement parts you need to keep your Fisher & Paykel gas cooktop working perfectly.

Top repair parts for Fisher & Paykel gas cooktops

  • Burner switch. The burner switch sends current to the igniter electrode to light the burner when you turn on a burner control valve.
  • Ignition module. The ignition module detects when you turn on a burner and sends the current to the igniter electrode to light the burner.
  • Wire harness. The wire harness connects electrical components inside the cooktop.
  • Power cord. The power cord supplies the cooktop with electrical current for spark ignition.

Replacing the spark module on a Fisher & Paykel gas cooktop

  • Unplug the cooktop's power cord from the wall outlet and then close the gas supply shut-off valve.
  • Remove all the cooktop grates and then lift the gas burner caps off the burner heads. Remove the screws that hold the burner heads in place and then remove the burner heads.
  • Pull the control knobs off of the burner control valves. Remove the screws that secure the main top to the top of the burner orifice holders. Lift the main top off of the cooktop and set it aside.
  • Disconnect all the wires attached to the spark module. Release the locking tab and then remove the spark module from the mounting bracket. Discard the spark module.
  • Position the new spark module on the mounting bracket and push it into place. The locking tab should snap into place when the module is in the right position. Connect the wires to the new spark module.
  • Position the main top on top of the burner orifice holders. Insert and tighten the screws that secure the main top to the orifice holders. Push the control knobs on the burner control valves.
  • Position the burner heads in the correct locations, screw them into place and tighten the screws firmly. Cover the burner heads with the burner caps in the correct locations. Set the grates into place on the cooktop.
  • Plug the power cord into the wall outlet and open the gas shut-off valve.

Parts & More