Norge Dryer Parts — Browse All Models

Norge dryers are built for reliable performance. But even simple machines can develop occasional problems. Here’s what to check when your dryer isn’t drying as expected.

No heat in an electric model often points to a blown fuse, broken element, or faulty thermostat. These electric dryer heating problems can usually be diagnosed and fixed with a few simple tests. In gas models, gas dryer heating issues may stem from a failed igniter or bad gas valve coils.

If your Norge dryer hums but the drum stays still, the drive belt may have snapped. You can replace the dryer belt to get the drum spinning again.

Thumping, squealing, or rattling sounds could be coming from worn drum rollers. If they’re damaged, replace the drum support roller to restore quiet operation.

• Door switch – Keeps the dryer from running with the door open. A bad switch can make the dryer appear completely dead. Replace the door switch if it doesn’t respond when the door is closed.
• Drive belt – Connects the motor to the drum. If the belt breaks, the drum won’t turn during the cycle.
• Heating element – Supplies heat in electric models. A broken element leaves clothes cold and damp.
• Drum support roller – Helps the drum rotate smoothly. When worn, it causes banging or thumping during use.
• Thermal fuse – Cuts power when the dryer overheats. A blown fuse can prevent heat or shut the dryer down completely.

Only genuine OEM parts are built to fit your Norge dryer exactly. Sears PartsDirect gives you access to detailed diagrams, model-specific parts, and trusted repair resources so you can fix problems fast. Whether you’re replacing a door switch or a heating element, we help you get it right the first time.

First check the power cord and your home’s circuit breaker. If those are fine, the issue may be a failed door switch, blown fuse, or broken start switch.

Overheating can trip the thermal fuse and stop the dryer. A clogged vent or faulty thermostat could be to blame.

Clean the lint screen after every cycle, and use a dryer lint brush to clean the full vent path at least twice a year. Clean it more often if drying times increase.

It’s best to use OEM Norge dryer parts for reliable fit and performance. Off-brand parts may not match your model and could cause further issues.

Check inside the dryer door frame or on the back panel. Enter the number on Sears PartsDirect to view matching parts and diagrams.