Weider Stepper Parts — Browse All Models

Maintenance tips for your Weider stepper

• Inspect all parts of the stepper before each use.
• Tighten any loose screws, nuts, bolts, pins or fasteners before using the stepper.
• Replace any worn or damaged parts on the stepper immediately.
• Lubricate all moving parts on the stepper regularly using all-purpose grease.
• Replace the batteries in the console when the console appears dim or it's completely dead. You may also need to replace the batteries when resistance won't change or changes in resistance are sluggish.

Replacing the control console on your Weider stepper

• Remove the mounting screws from the console bottom.
• Pull the control console up to access the wire harness plug on the bottom of the console. Release the wire harness plug locking tab and disconnect the console wire harness.
• Position the new control console near the top of the console mounting frame and connect the console wire harness to the new control console.
• Reinstall the console mounting screws to secure the new control console to its frame.
• Install batteries in the new control console.