Tandy Office Parts — Browse All Models

Common Tandy printer error messages

• Access Denied. The printer feature that you want to use is restricted by a function lock. Disable the function lock to use the feature.
• Calibrate. The color calibration function failed. Turn the machine off and wait a few seconds, then turn it on again. Perform the color calibration function using the control panel. If the printer still won't calibrate the color, replace the belt unit.
• Cartridge Error. The toner cartridge isn't installed correctly. Remove the toner cartridge and install it correctly.
• Belt End Soon. The belt is nearly worn out. Install a replacement belt unit.

Replacing the projector bulb in your Tandy office equipment

• Unplug the power cord and let the lamp cool down completely before replacing it.
• Locate the lamp access panel and remove the access panel mounting screws. Remove the lamp access panel.
• Carefully reach in and pull the lamp out of the projector.
• Wear gloves to prevent finger prints and oils from depositing on the new bulb. Unpack the new bulb and carefully install it in the projector.
• Reinstall the lamp access panel and secure the panel with the mounting screws.
• Plug the equipment power cord back in.