Sylvania Dvd/vcr combo Parts — Browse All Models

Troubleshooting your Sylvania DVD/VCR combo player when the remote control doesn't work

• Check the batteries in the remote control. Weak or dead batteries won't power up the remote device. Replace the remote control batteries if they're weak or dead.
• The remote control has an effective range of about 20-feet. Make sure that you're within range of the DVD/VCR combo player when attempting to use the remote.
• Check for items blocking the RF sensor on the DVD/VCR combo player and move any items out of the way to allow the DVD/VCR combo player to receive remote control RF signals.
• The microprocessor inside the remote can fill up its internal memory or the microprocessor can get the memory scrambled at times. Reset the microprocessor and drain the memory in the remote by removing the remote control batteries and holding down one or more buttons on the remote device for several minutes. Reinstall the batteries and the remote may work normally again.
• You may need to replace the remote if it won't work after resetting the microprocessor and it has good batteries.

Top replacement parts for Sylvania DVD/VCR combo players

• DVD deck assembly. The DVD deck assembly contains the main components of the DVD player, including the tray, disc drive motor and gears.
• Main electronic control board. The main electronic control board governs the settings and functions of the DVD/VCR combo player and powers the components inside the DVD/VCR combo player.
• Audio control board. The audio control board receives audio signals from the DVD disc or video cassette. The audio control board processes the audio signals to produce audio playback output.
• DVD optical pick-up. The DVD optical pick-up receives the digital image from the DVD and sends the signal back to the control board.
• Wi-Fi module. The Wi-Fi module allows you to connect the DVD/VCR combo player with your wireless network to get DVD/VCR combo player updates and perform other advanced DVD/VCR combo player functions.