Krebs Painting power tool Parts — Browse All Models

How to replace the spray tip on your Krebs painting power tool

• Turn off the motor and trigger the spray gun to relieve pressure in the spray gun.
• Unplug the power cord or remove the battery pack from the painting power tool.
• Lock the spray gun trigger.
• Use a wrench to remove the spray tip and tip guard from the spray gun. Properly clean the removed spray tip for reuse.
• Thread the new spray tip and tip guard onto the spray gun.
• Tighten the spray tip and tip guard firmly with the wrench.

Krebs painting power tool common repair and replacement parts

• Paint filter. The paint filter traps particles and impurities in the paint that could clog the spray nozzle when applying the paint.
• Spray nozzle. The spray nozzle regulates paint flow and creates the spray pattern for paint application.
• Spray gun trigger. The spray gun trigger starts and stops the flow of paint going to the spray gun nozzle.
• Spray gun valve. The spray gun valve opens and shuts based on the position of the trigger to start and stop the flow of paint to the spray gun nozzle.