Official Electrolux microwave/hood combo parts

Cleaning grease filters in your Electrolux microwave hood combo

• Unplug the microwave hood combo from the wall outlet to disconnect electrical power.
• Slide the filter to the side, pull downward and push to the other side to remove it. Repeat the process to remove the other grease filter.
• Soak the grease filters in a hot water and milt detergent for 30 minutes.
• Scrub grease from the filters using a soft-bristle brush.
• Rinse the filters thoroughly using hot tap water.
• Shake water from the filters and allow them to dry completely.
• Reinstall the grease filters and plug the microwave hood combo power cord back into the wall outlet.

Top replacement parts for Electrolux microwave hood combos

• Door handle. The door handle allows you to open the microwave door to pull you food after when it's cooked. A service technician should replace the microwave door handle because door shielding is disturbed during the repair process and the door should be properly tested for microwave radiation leakage before the microwave is returned to service.
• Circulation fan motor. The circulation fan motor drive the exhaust fan blades to remove smoke and cooking odors from the kitchen.
• Vent grill. The vent grill covers and protect the opening at the top of the microwave cabinet above the door.
• Exhaust vent damper. The exhaust vent damper allows exhaust air out but prevents air from flowing back into the kitchen from the exhaust duct system when the fan is off.