RCA Televisions with vcr or dvd Parts — Browse All Models

Troubleshooting your RCA television when it won't power up

• Check that the television power cord is fully plugged into the wall outlet. If you have the television plugged into a surge protector, make sure the surge protector is plugged into the wall outlet.
• Check the electrical wall outlet for power. Plug a night light or small appliance into the electrical wall outlet to see if the outlet has power. If the outlet is dead, reset the house circuit breaker for the electrical wall outlet.
• If the wall outlet is okay and you have the television plugged into a surge protector, reset the surge protector if the surge protector tripped. If the surge protector isn't tripped, plug the television directly into the wall outlet. If the television powers up when plugged directly into the wall outlet, replace the surge protector because it isn't allowing the television to get power.

Installing the table-top stand on your RCA television

• Remove all packing materials from the table-top television stand. Find a screwdriver to use when installing the stand on the television cabinet.
• Wear work gloves to protect your hands when installing the television stand.
• Position the stand on the entertainment center or table. Using a helper, carefully lift the television and slide the base of the television cabinet onto the stand. Support the television as you install the stand mounting screws. Tighten the mounting screws firmly. Don't put stress on the display panel or the cabinet frame around the display panel. Be careful not to pinch your hands or the power cord as you install the television on the table-top stand.
• Tighten the stand mounting screws firmly. Check the television for stability after installing the stand.