WEN reciprocating saw repair and replacement parts

Electrical safety precautions to follow when using your Wen reciprocating saw

• The reciprocating saw plug must match the receptacle on the electrical wall outlet. Never modify the power saw's power cord plug in any manner. Don't use an adapter plug with an earth grounded power saw.
• Don't expose the power saw to rain or wet conditions. Water entering the power saw will increase the risk of electric shock.
• Check the condition of the power cord before using the reciprocating saw. Repair damaged wires in the power cord or replace the power cord if it's damaged before using the reciprocating saw.
• When operating the reciprocating saw outdoors, use an extension cord rated for outdoor use to prevent the chance of electrical shock.
• If operating the reciprocating saw in a damp location or around a water source, use a GCFI protected power supply.

Installing the blade on your Wen reciprocating saw

• Unplug the power cord or remove the battery from the saw. Wear work gloves to protect your hands while installing the blade.
• Extend the adjustable/pivoting shoe away from the blade clamp.
• Push the blade clamp lever up with your thumb and hold it up.
• Insert the blade into the blade clamp and make sure the blade attaches to the blade nub inside the clamp.
• Release the blade clamp lever to lock the blade in place. Pull on the blade to make sure it's securely locked in place.