Kenmore Pressure cooker Parts — Browse All Models

Troubleshooting your Kenmore pressure cooker when it won't build up pressure

You can't get your canning or cooking done if your pressure cooker doesn't build up pressure. Make sure you have enough water in the pressure cooker to build up pressure. Add water if needed. Make sure that the lid is properly closed. Check your owner's manual for instructions on properly sealing the lid shut if needed. Make sure the burner you're using to heat the pressure cooker is heating properly. The pressure cooker won't build up pressure if the burner isn't working. If the lid is properly closed and the burner works, check to see where steam escapes. If the lid allows steam to escape, then you'll likely need to replace the lid seal. If steam escapes from the pressure regulator, then you'll likely need to replace the pressure regulator.

Common replacement parts for Kenmore pressure cookers

• Pressure gauge. The pressure gauge measures pressure in pounds per square inch, or PSI. The pointer moves around the dial indicating the pressure within the unit. Pressure can be controlled and maintained by adjusting the heat setting on your stove.
• Pressure regulator. The pressure regulator acts as a safety device to prevent pressure in excess of 15 pounds from building in the pressure cooker.
• Vent pipe. The vent pipe is the primary pressure relief valve and will release pressure in excess of 15 pounds. The pressure regulator sits loosely on the vent pipe.
• Seal ring. The seal ring fits into the pressure cooker cover and forms a pressure-tight seal between the cover and body during canning and cooking.