Chicago Pneumatic Power sander Parts — Browse All Models

Safety tips for your Chicago Pneumatic power sander

• Sanding surfaces covered in lead based paint is not recommended because it's difficult to safely control contaminated dust.
• Keep others away from the work area when sanding and grinding work pieces.
• Wear eye protection and use a dust mask or respirator when sanding and grinding work pieces. Replace the filter on the respirator regularly.
• Wear work gloves to protect your hands when using the power sander.
• Minimize the amount of dust generated when sanding painted surfaces. Use the dust bag to catch dust whenever possible.
• Seal areas being sanded with plastic sheeting to minimize others exposure to dust.

How to maintain your Chicago Pneumatic power sander

• Thoroughly clean the power sander after each use. Blow dust and grit out of the motor housing using compressed air. Clean the entire exterior of the power sander with a damp cloth. Don't immerse any part of the power sander in water or liquid to clean the tool.
• Follow the guidelines in the owner's manual to properly lubricate the power sander
• Before each use, check all fasteners on the power sander. Tighten any loose fasteners.
• Inspect the power sander for worn or broken parts regularly. Replace any worn or broken parts before using the power sander.