CONFIRM THE PART FITS
Part Information
This height adjuster (part number 438486) is for lawn mowers.
Height adjuster 438486 moves the lawn mower wheel up or down to adjust the lawn mower deck to the desired cutting height.
Wear work gloves to protect your hands when installing this part.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #917375010 Craftsman gas walk-behind mower | 917375010 | Drive control/gear case/wheels |
| Model #917375011 Craftsman gas walk-behind mower | 917375011 | Drive control/gear case/wheels |
| Model #917375012 Craftsman gas walk-behind mower | 917375012 | Drive control/gear case/wheels |
| Model #917375013 Craftsman gas walk-behind mower | 917375013 | Drive control/gear case/wheels |
| Model #917375020 Craftsman gas walk-behind mower | 917375020 | Drive control/gear case/wheels |
| Model #917375021 Craftsman gas walk-behind mower | 917375021 | Drive control/gear case/wheels |
| Model #917375611 Craftsman gas walk-behind mower | 917375611 | Drive control/gear case/wheels |
| Model #917375630 Craftsman gas walk-behind mower | 917375630 | Drive control/gear case/wheels |
| Model #917375631 Craftsman gas walk-behind mower | 917375631 | Drive control/gear case/wheels |
| Model #917375632 Craftsman gas walk-behind mower | 917375632 | Drive control/gear case/wheels |
Reviews
total junk, too much play.
complete garbage. old part had ball bearing worn out that caused the drive gear to strip the wheel. This one is worse, there is no bearing and more play then the worn out one. total junk that took over 6mth to arrive.
kija, Downingtown, PA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Caution when ordering
Easy to install 2 nuts to remove. However when ordering part online, be careful there is a left and right adjuster. Right adjuster is not described as that. I ended up with 2 for right side!!!!
Undisclosed, Buffalo NY
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Quick & easy
15 minute install. Helps to support front of mower on a block of wood or jackstand if you have one. Remove wheel nut then wheel and washer behind it. Remove C clip holding drive gear, then remove gear. Remove pin from drive shaft that keeps the drive gear in place. Remove dust shield. Remove two 7/16 nuts from studs under the mower deck that hold the height adjuster to the mower. Now reverse steps to install new height adjuster.
Race f, Illinois
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Very easy to replace
It took less than 15 minuets to replace the part and it worked great
Phila d, Phila pa
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Quality part, easy to install
High quality replacement part which took about 20 minutes to install. I took pictures when I removed it so that helped.
Cheesecake1112, Jessup, MD
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes