CONFIRM THE PART FITS
Part Information
Special details: Smooth folds and creases in gasket WR24X445 by soaking it in warm water or warming it with a hair dryer on low heat.
This freezer door gasket (part number WR24X445) is for refrigerators.
Freezer door gasket WR24X445 creates a seal around the door to prevent warm air from entering the freezer compartment.
Safely store any food that could deteriorate while the door is open for this repair.
Frequently Used Together
- $86.50 |5% OFF Phone Price : $91.50
- $23.67 |17% OFF Phone Price : $28.67
- $24.04 |17% OFF Phone Price : $29.04
- $79.18 |6% OFF Phone Price : $84.18
- $7.09 |12% OFF Phone Price : $8.09
- $607.54 |$10.00 OFF Phone Price : $617.54
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #3638792812 Kenmore compact refrigerator | 3638792812 | Freezer door |
Model #3638792891 Kenmore refrigerator | 3638792891 | Freezer door |
Model #CTX21DAZBRAA Hotpoint top-mount refrigerator | CTX21DAZBRAA | Freezer door |
Model #TBX22VAZLRWW GE top-mount refrigerator | TBX22VAZLRWW | Freezer door |
Model #TBX22VAZLRAA GE top-mount refrigerator | TBX22VAZLRAA | Freezer door |
Model #TBX21NIXZRWW GE top-mount refrigerator | TBX21NIXZRWW | Freezer door |
Model #3639712785 Kenmore refrigerator | 3639712785 | Freezer door |
Model #3639612786 Kenmore refrigerator | 3639612786 | Freezer door |
Model #TBX21JISRRWH GE top-mount refrigerator | TBX21JISRRWH | All parts |
Model #3639712819 Kenmore refrigerator | 3639712819 | Freezer door |
Reviews
not exact fit
Product is about 1/2" shorter diameter than original gasket. Nearly impossible to get all 4 corners of gasket to seat properly. Heated gasket up per directions to straighten out. Ended up making small tear in one corner because I had to force it into channel with lots of pulling…still not seated totally. Glad I did not ruin old seal as I may now need to put it back on. Buyer beware!
Matt, Chicago, IL
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Doesn't seal right
It never sealed and the bottom of the freezer still seeps out cold air
Dakota, Arizona
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Works Great
This fit perfectly. Removing the old seal was quite easy. The new seal was challenging to seat in the channel probably because the door was still attached (I was unable to remove the freezer door; the screws were simply too tight). Ultimately managed to get the seal set properly.
Jill, New Jersey
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Good fit and seal
This seal was fairly easy to install. Make sure you clean all surfaces before installing this new seal. Also make sure the corners are fitted. You'll need to push firmly to seat this seal. Go slow and take your time.
whatever, texas
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend