Snowblower Engine Oil Drain Pipe and Cap 951-10641

Basic Information

• Part Name: Snowblower engine oil drain pipe and cap
• Manufacturer: MTD
• Category: Snowblower
• Primary Function: Attaches to the engine oil drain port to allow clean and controlled oil draining, and seals the opening when not in use

Installation & Compatibility

• Compatible Models: Fits select MTD and Craftsman snowblowers; confirm compatibility using your models parts diagram before ordering
• Installation Difficulty: Easy; requires attaching to the engine drain port and tightening the cap
• Tools Required: Wrench and work gloves

Additional Information

Snowblower engine oil drain pipe and cap 951-10641 connects to the oil drain port to simplify oil changes and prevent spills. The included cap securely seals the pipe to stop leaks between maintenance intervals.

Replace the drain pipe and cap if the fitting is damaged, cracked, or leaking. Regular inspection ensures a proper seal and prevents oil loss or contamination during operation.

Before installation, let the engine cool completely and drain any remaining oil into an approved container. Remove the old drain pipe, install the new one, and tighten securely. Refill the crankcase with the recommended oil before starting the engine. Wear work gloves to protect your hands during installation.

Snowblower engine oil drain pipe and cap 951-10641 replaces part number 751-10641.