CONFIRM THE PART FITS
Part Information
This fuel tank assembly (part number 545103702) is for line trimmers.
Fuel tank assembly 545103702 holds fuel. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.
Drain the gas tank into an approved storage container in a well-ventilated area before installing this part. Wear work gloves to protect your hands.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #944515460 Craftsman gas line trimmer | 944515460 | |
| Model #944514360 Craftsman gas line trimmer | 944514360 | |
| Model #PP025 TYPE 2 Poulan gas line trimmer | PP025 TYPE 2 | Fuel tank/cylinder/crankcase |
| Model #358791051 Craftsman gas line trimmer | 358791051 | |
| Model #PP258TP Poulan power pruner | PP258TP | Cylinder/fuel tank/crankshaft |
| Model #944516561 Craftsman gas line trimmer | 944516561 | |
| Model #SM705 TYPE 2 Poulan gas line trimmer | SM705 TYPE 2 | |
| Model #P4500F Poulan gas line trimmer | P4500F | |
| Model #TE475Y Weed Eater gas line trimmer | TE475Y | Cylinder/crankshaft/crankcase |
| Model #PP258TP TYPE 2 Poulan power pruner | PP258TP TYPE 2 | Cylinder/crankcase/fuel tank |
Reviews
easy to install
Item was exact replacement even though my trimmer was 14 years old.
Tom P, Williamsburg Va
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Perfect replacement
Perfect replacement fuel tank, fuel filter, and fuel lines. Easy replacement but needed a Torx screwdriver to remove the existing mounting screws.
Garden G, California
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Gas tank
Just what i needed. Fuel line coming into the engine inside diameter is smaller then the piece it attaches too.
Joseph m, East coast
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
One fuel Lin too small to fit
There are two fuel lines coming out of the fuel tank. One is too small to fit.
Calvertjunk, Anniston al
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Easy to install.
It was easy to install and took me about 15 minutes from disassembly to installing the replacement.
Mr G, Virginia Beach, VA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Simple to install
Quick fix, took all of 5 minutes to install the new fuel tank and spark plug and it fired right up!
Sarge472, Michigan
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- Less than 30 minutes
A snap to install
Since I already had the old tank removed, Half the job was already completed when the part was received.
Proud V, McCaysville, Ga.
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Bolted right in place
Two torx screws and connect the lines to the carb. just remember which line you removed from where. They are 2 different sizes. Use caution reattaching the line, they may puncture if not done carefully!
JMan65, SE Penna
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour