$4.16 |Â
19% OFFÂ Phone Price : $5.16
CONFIRM THE PART FITS
Part Information
This scraper blade (part number 731-08171) is for snowblowers.
Scraper blade 731-08171 attaches to the bottom of the auger housing to protect the housing and augers.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $6.55 |Â13% OFFÂ Phone Price : $7.55
- $5.44 |Â16% OFFÂ Phone Price : $6.44
- $80.54 |Â17% OFFÂ MSRP : $97.00
- $112.87 |Â8% OFFÂ Phone Price : $122.87
- $156.80
- $13.53 |Â13% OFFÂ Phone Price : $15.53
- $9.66
- $63.73
- $5.27 |Â23% OFFÂ MSRP : $6.80
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #247887822 Craftsman gas snowblower | 247887822 | Auger/lower handle/fuel tank |
| Model #31AM2T6D799 MTD gas snowblower | 31AM2T6D799 | Auger/lower handle/fuel tank |
| Model #247887803 Craftsman gas snowblower | 247887803 | Auger/lower handle/fuel tank |
| Model #247116831 Craftsman gas snowblower | 247116831 | Lower handle/auger/fuel tank |
| Model #31AS2S1D793 MTD gas snowblower | 31AS2S1D793 | Auger & housing |
| Model #24711683 Craftsman gas snowblower | 24711683 | Fuel tank/auger |
| Model #247116830 Craftsman gas snowblower | 247116830 | Auger housing/fuel tank/wheels |
| Model #247887800 Craftsman gas snowblower | 247887800 | Auger & housing |
| Model #247887801 Craftsman gas snowblower | 247887801 | Auger & housing/fuel tank |
| Model #247887802 Craftsman gas snowblower | 247887802 | Auger housing/fuel tank/wheels |
Reviews
Overpriced
Overpriced
Julie, Beaver, PA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
snowblower scrapper
snowblower scrapper good part, good price, quality part.
David F, Hyrum, Utah 84319
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Total crap and a bait and switch!
Total crap! I ordered grade 8 nuts bolts and washers only to get cheap aluminum garbage, my order never showed for two weeks and got returned to California and has been lost in nobody at Cedars wants to help out and figure it out. I will never order from Sayers again, it's no surprise you've gone out of business
JLoew, New York
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Show blower shave plate
Quick shipping and the right part. You should know they are reversible, which I didn't know until I started to install the new one.
LTCREDLEG, Missouri
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
I expected better service
On the plus side, the parts arrived promptly. I ordered a pair of replacement scraper blades for my snow blower. One was ok, the other blade had two glaring issues. The plastic blade was badly warped on both ends and damaged from having been previously installed. Looks to me that I was sent a returned part. I will return damaged part for another one. Whoever is in charge of returns dropped the ball by not destroying an obviously defective and damaged part, allowing it to get back into the inventory and ultimately wasting my time by having to write this review, print off a return label, wrap up the part and finally drive to my Post Office to send the part back.
Roger W, Littleton, Co
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Good part, decent price.
Good part. Easy installation. And ordering this part came with a pleasant surprise; the part is reversible. Meaning that when prolonged operation wears down the leading edge the opposite side of the part can then be used as well! This is an added benefit that I wasn't expecting and I didn't see it advertised as such.
DeMar, Buffalo
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Just what I ordered easy to install
Fit just right ,only took a few minutes to install
Jimd, Michigan line
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Very!
Tilted the blower back took out the bolts put on the new one and done. 5 to 10 minutes.8
Sonny b, Hays,Ks.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend