CONFIRM THE PART FITS
Leaf Blower Impeller (replaces 545113601) 580780901
Part #580780901
Part Information
This impeller (part number 580780901) is for leaf blowers.
Impeller 580780901 turns on the motor shaft to create the airflow blowing from the leaf blower.
Unplug the leaf blower or remove the battery pack before installing this part. Wear work gloves to protect your hands.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #358794600 Craftsman gas leaf blower | 358794600 | Handle/scroll/impeller |
| Model #358794703 Craftsman gas leaf blower | 358794703 | Scroll/impeller/fuel tank |
| Model #VS2000BV TYPE 4 Weed Eater gas leaf blower | VS2000BV TYPE 4 | Scroll/impeller/handle |
| Model #BVM200FE TYPE 3 Poulan gas leaf blower | BVM200FE TYPE 3 | Scroll/impeller/handle |
| Model #MC200VS TYPE 2 McCulloch gas leaf blower | MC200VS TYPE 2 | Scroll/impeller/handle |
| Model #358794704 Craftsman gas leaf blower | 358794704 | Scroll/impeller/handle |
| Model #358794650 Craftsman gas leaf blower | 358794650 | Handle/scroll/impeller |
| Model #MC200VS TYPE 3 McCulloch gas leaf blower | MC200VS TYPE 3 | Scroll/impeller/handle |
| Model #MC200VS TYPE 1 McCulloch gas leaf blower | MC200VS TYPE 1 | Scroll/impeller/handle |
| Model #VS2000BV TYPE 3 Weed Eater gas leaf blower | VS2000BV TYPE 3 | Scroll/impeller/handle |
Reviews
Easy to install
Done fast 20 minutes with parts and pictures 1234567890
Dmoose, Branford CT
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Went without a hitch.
No problems except that I have two screws left over. Took it apart again to try and find out where they go. Still have two screws left.
Don37, McKinney, Texas
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy to install
Removed the screws holding the case together. The two deep ones needed a little Liquid Wrench to free them up. Separated the case, used a socket wrench to remove the nut from the shaft, slipped on the new impeller, and put everything back together. Biggest complaint was the shipping charge for the part. As much as the part itself. I liked it better when you could order the part and have it shipped to the Repair Center for free as long as you picked it up.
Leaf b i, Overland Park, KS
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour