CONFIRM THE PART FITS
Freezer Lid Gasket 216469301
Part #216469301
Part Information
Helpful DIY instructions: Installation guide.
Special details: Smooth folds and creases in gasket 216469311 by soaking it in warm water or warming it with a hair dryer on low heat.
This lid gasket (part number 216469311) is for freezers.
Lid gasket 216469311 creates a seal around the lid to prevent warm air from entering the freezer.
Safely store any food that could deteriorate while the lid is open for this repair.
Frequently Used Together
- $19.49 |Â9% OFFÂ Phone Price : $21.49
- $91.53 |Â5% OFFÂ Phone Price : $96.53
- $212.89 |Â$10.00 OFFÂ Phone Price : $222.89
- $11.77 |Â15% OFFÂ Phone Price : $13.77
- $9.40 |Â10% OFFÂ Phone Price : $10.40
- $384.25 |Â$10.00 OFFÂ Phone Price : $394.25
- $13.31 |Â13% OFFÂ Phone Price : $15.31
- $52.69 |Â9% OFFÂ Phone Price : $57.69
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #WFC25M4HW0 White-Westinghouse chest freezer | WFC25M4HW0 | Door |
Model #MFC25M4GW1 Universal/Multiflex (Frigidaire) chest freezer | MFC25M4GW1 | Door |
Model #MFC23M4FW0 Universal/Multiflex (Frigidaire) chest freezer | MFC23M4FW0 | Door |
Model #WFC25M4HW1 White-Westinghouse chest freezer | WFC25M4HW1 | Door |
Model #MFC20M4FW0 Universal/Multiflex (Frigidaire) chest freezer | MFC20M4FW0 | Door |
Model #MFC25M4FW0 Universal/Multiflex (Frigidaire) chest freezer | MFC25M4FW0 | Door |
Model #MFC23M4FW1 Universal/Multiflex (Frigidaire) chest freezer | MFC23M4FW1 | Door |
Model #MFC20M4FW1 Universal/Multiflex (Frigidaire) chest freezer | MFC20M4FW1 | Door |
Model #MFC25M4FW1 Universal/Multiflex (Frigidaire) chest freezer | MFC25M4FW1 | Door |
Model #GFC25M4HW0 Gibson chest freezer | GFC25M4HW0 | Door |
Reviews
Relatively easy to install.
Removing old seal was much harder than installing the new one. Went on smoothly.
Sandy, Mississippi
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Could do better
Changing the gasket was not difficult. The disappointment was in the deformation of the gasket due to how it was packaged. This did not straighten out as claimed even with the assistance of a heat gun. The other disappointment is that a fastener kit was not recommended. When a gasket is old enough to replace, these plastic fasteners are brittle and easily break upon removal.
PerchMan, WI
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Came in poor condition
Will need to return - wrinkled. And no directions were included.
Jim W, Coventry, CT
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend