$65.79 |Â
7% OFFÂ Phone Price : $70.79
CONFIRM THE PART FITS
Part Information
Special details: Smooth folds and creases in gasket WR24X438 by soaking it in warm water or warming it with a hair dryer on low heat.
This freezer door gasket (part number WR24X438) is for refrigerators.
Freezer door gasket WR24X438 creates a seal around the door to prevent warm air from entering the freezer compartment.
Safely store any food that could deteriorate while the door is open for this repair.
Frequently Used Together
- $49.99
- $54.99
- $6.67 |Â13% OFFÂ Phone Price : $7.67
- $14.09
- $212.50 |Â$10.00 OFFÂ Phone Price : $222.50
- $15.85 |Â11% OFFÂ Phone Price : $17.85
- $13.61 |Â13% OFFÂ Phone Price : $15.61
- $24.54
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #TBX25PRYALAA GE top-mount refrigerator | TBX25PRYALAA | Freezer door |
| Model #TBG25PAXERWW GE top-mount refrigerator | TBG25PAXERWW | Freezer door |
| Model #TBX25PCXCLBB GE top-mount refrigerator | TBX25PCXCLBB | Freezer door |
| Model #TBE25PCTHLAA GE top-mount refrigerator | TBE25PCTHLAA | Freezer door |
| Model #TBE25PATHRWW GE top-mount refrigerator | TBE25PATHRWW | Freezer door |
| Model #TBG25PAXDRWW GE top-mount refrigerator | TBG25PAXDRWW | Freezer door |
| Model #TBX25PASYRWW GE top-mount refrigerator | TBX25PASYRWW | Freezer door |
| Model #TBT25PAXFRWW GE top-mount refrigerator | TBT25PAXFRWW | Freezer door |
| Model #TBX25PRYCRWW GE top-mount refrigerator | TBX25PRYCRWW | Freezer door |
| Model #3639734719 Kenmore top-mount refrigerator | 3639734719 | Freezer door |
Reviews
Fit perfectly - nice replacement part
This seal was an easy replacement of the old seal. I simply pulled out the old one and pressed the new one into place. My only complaint is that the new one arrived with some decent kinks from the packing and shipping. I soaked it in hot water but they were still there during installation. After a week, they are much less noticeable but still not a perfect fit against the body of the freezer.
F15Weazel, Camas, WA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
very hard to replace
very hard to replace took 2 hours with breaks because hands got cold.We had a neighbor that use to do this as a job and he had a hard time .finally we put a hasp and lock on it 2 keep it closed after 2 weeks it sealed fine with out the lock.I need to do the big door but these seals are very expensive and i don't think we could do it
freezer d s, va
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Folded for shipping; worse than the originals
Instructions explain how to "smooth" gaskets. Gaskets were so wrinkled, they didn't lay flat on door. Cold air leaks all the way around the seal and because of the wrinkles, magnets don't make solid contact with frig. Had to put old gaskets back on.
ahwol, Elkton, MD
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Gaskets were misshapen and hard to install
Hard to install even following instructions for hot water heating. Gaskets were misshapen from packaging.
Mike977, Henrico NC
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
No instructions given
We had to go on line and look up instructions on how to install the seal. After my husband read over the instructions he decided it was to complicated. So I am still waiting for the seal to be put on.
boomer, Arizona
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours