$2.81 |Â
49% OFFÂ MSRP : $5.49
CONFIRM THE PART FITS
Edger Blade, 2-pack 85719
Part #85719
Part Information
This blade (part number 85719) is for edgers.
Blade 85719 attaches to the drive shaft to cut and edge the grass.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $9.79 |Â9% OFFÂ Phone Price : $10.79
- $8.80 |Â10% OFFÂ Phone Price : $9.80
- $11.24 |Â20% OFFÂ MSRP : $14.00
- $9.79 |Â9% OFFÂ Phone Price : $10.79
- $7.34 |Â12% OFFÂ Phone Price : $8.34
- $17.24 |Â10% OFFÂ Phone Price : $19.24
- $11.05 |Â15% OFFÂ Phone Price : $13.05
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #944511573 Craftsman line trimmer | 944511573 | |
| Model #358792403 Craftsman line trimmer | 358792403 | |
| Model #944511574 Craftsman line trimmer | 944511574 | |
| Model #944511571 Craftsman line trimmer | 944511571 | |
| Model #944511570 Craftsman line trimmer | 944511570 | |
| Model #358792400 Craftsman line trimmer | 358792400 | |
| Model #358792402 Craftsman line trimmer | 358792402 | |
| Model #358792401 Craftsman line trimmer | 358792401 | |
| Model #358792404 Craftsman line trimmer | 358792404 | |
| Model #944511572 Craftsman line trimmer | 944511572 |
Reviews
Easy to install
Took about five min., remove nut and washer, r&r blade install washers and nut. Job complete
Les t, Tulsa Oklahoma
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
great product and pricing
Took less than 10 minutes to install. Was only able to find these replacements on this site. Sears website indicated that they were unable to ship to my address and that I needed to drive over 90 miles to find in store replacements. Highly recommend purchasing from this site. PRoduct was less expensive than anywhere else it was available. Purchased to the shipping break off. Speedy delivery and great packing.
uncle g, Oak Lawn
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Need more details to install
The photo provided is not helpful. Ended up breaking another part to take off the old blade.
David55, California
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
purchase edger blades
After waiting on the telephone with the person assisting me, He said, "I found some blades that will replace what you have. When I received the blades they did not fit. the original blade has a 3/8" diameter hole for the shaft to fit into. The blades sent to me had a 3/4 inch hole much to big for my edger. If one can not find a correct replacement, one should not sell me something that does not fit just to get money. I am very disappointed in the saleperson and in Sears. I now have an edger that will need to thrown away because I can not find blades for it.
ken s b I o h, Undisclosed
1 person thought this review was helpful.
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Easy to install
This part was veryEasy to install it only took a few minutes
Bobbyhonda, San jose CA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Followed directions broke the dust cup
Do not insert screw driver onto slot that they recommend,instead grab old blade with pliers or vice grip.
Custer, Michigan
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Relatively Easy to Install, But Beware!
Changing out the edger blade is simply a matter of removing a nut and two washers, removing the old blade, and then installing the new blade, the two washers and the nut. However, my 2-pack of blades came with two slightly different quick guides on how to do the change out. Both guides stated what I described above, but one of the guides also stated that the nut had to be removed clockwise and re-installed and tightened counter clockwise. In other words the shaft and nut are reverse threaded. If someone doesn't know this and followed the incorrect guide that was in the pack they would simply be tightening the nut by trying to turn it in the normal counter clockwise direction. The second incorrect card should never have been included in the 2-pack, but I bought two sets of 2-pack replacement blades and both packs had two quick guides, one correct guide and one incorrect guide.
John M, Chicagoland
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Stardard equipment
The edger blade install easy and work fine but they are the standard blade made for my edgers so that would be expected.
OC J, So California
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes