Craftsman 11329450 10" radial arm saw Parts

Yes. A Craftsman radial arm saw like model 11329450 is worth something, but resale value is driven mostly by condition, completeness (guard, fence, table, crank handles), and local demand; many 10-inch Craftsman units sell modestly compared with premium vintage DeWalt or Delta saws.

• Runs smoothly under load (no bogging, excessive sparking, or burning smell)
• Arm and carriage tightness (minimal side play, no binding when elevating)
• Safety and completeness (blade guard, anti-kickback parts, rip fence, table top)
• Accuracy and adjustability (yoke locks securely at indexed positions)
• Cosmetics and rust (surface rust is common; heavy pitting lowers value)

Use these checks from the 11329450 owner's manual to judge whether the saw is “ready to work” or a “project”:

• Verify the yoke clamp arm locks the yoke firmly in position.
• Confirm the swivel index knob indexes cleanly at 90 degree positions.
• Check for radial arm side play; the manual describes an adjustment using a 3/16-inch Hex-L wrench.
• Turn the elevation crank through its range; it should move without binding.
• Inspect the cord, switch, and wiring for damage before powering on.

Prices vary by region, but these ranges are common for 10-inch radial arm saws:

Radial arm saws can be excellent for crosscuts, dados, and repetitive length cuts, but they take space and must be set up correctly. A well-tuned saw is more useful (and more valuable) than a dirty saw that “runs” but will not hold alignment.

Last updated: February 2026

For most woodworkers, the “best” radial arm saw brand is the one with the most rigid arm and yoke, accurate indexing, and long-term parts support. For your Craftsman 11329450 10-inch radial arm saw, proper adjustment and setup often matter more than the name on the badge. See the owner's manual for alignment, yoke indexing, and wear-compensation adjustments.

A strong brand choice usually comes down to these practical factors:

• Solid arm and column design that resists side play
• Reliable yoke rotation and positive indexing at common angles
• Easy-to-lock clamps (arm lock, yoke clamp) that hold settings
• Availability of replacement parts and clear diagrams
• A manual with detailed adjustment procedures

This Craftsman model includes built-in adjustments to compensate for wear over time. For example, the manual describes how yoke rotation is controlled by the swivel index knob and yoke clamp arm, and it also outlines a procedure for removing radial arm side play using a 3/16-inch hex key and the column tube wedge key adjustment.

Radial arm saws are extremely sensitive to looseness and misalignment. A well-adjusted Craftsman can outperform a “better brand” saw that has arm play, a slipping yoke clamp, or poor setup.

Last updated: February 2026

Craftsman did not stop making radial arm saws in one single, universal year; production and retail availability varied by model and by the company building the saw for Sears. For your Craftsman 11329450 (10-inch radial arm saw), the most reliable way to place it in time is to use the identification information and parts list in the 11329450 owner's manual.

Use these practical identifiers to narrow the era for your specific saw:

• Check the model and serial tag on the arm, column, or base; record the full serial number
• Look for the manufacturer source number (often part of the model prefix or tag information)
• Compare your saw’s features to the manual diagrams (yoke, carriage, guard style, switch location)
• Match key assemblies in the parts list (motor assembly, switch, cord, brake components)
• Confirm the exact model number is 11329450 (not a close variant)

People use this phrase in a few different ways; here is how we separate it:

Knowing the approximate era helps you choose compatible replacement parts and tune-up steps. Older radial arm saws depend heavily on alignment and lock mechanisms for accurate, repeatable cuts.

For ongoing maintenance on the 11329450, the manual’s adjustment section is especially useful; it covers wear compensation steps like removing radial arm side play and properly locking the yoke and carriage.

Last updated: February 2026

For your Craftsman 11329450 10-inch radial arm saw, we recommend buying replacement parts by matching your exact model number and the part number from the parts list in the owner's manual. That ensures you get the correct motor, switch, cord, or hardware for this specific saw.

Use the parts list and exploded views in the manual to identify the exact part number, then order using that part number (not the diagram key number).

• Find the part in the exploded view (Figures 1 through 6)
• Write down the part number and part name/description
• Confirm your model number: 11329450
• Order by part number to avoid mismatches (common with older Craftsman tools)
• If the part is listed as a complete assembly, order the assembly when that is the intended service replacement

The manual calls out four details that prevent wrong-part orders.

Radial arm saw parts are often version-specific. Using the 11329450 parts list helps you avoid ordering a similar-looking switch, relay, or cord that will not mount correctly or match the wiring.

• Unplug the saw before any inspection or repair
• Replace damaged cords, grommets, and strain reliefs immediately
• Use the correct fuse or circuit breaker rating for the circuit
• If you are troubleshooting electrical issues, test carefully with the right meter and settings

Last updated: February 2026