Craftsman 706597440 tool box Parts

On a Craftsman tool chest like model 706597440, the model number is usually on a product ID label inside a drawer or on the cabinet body (often near the top drawers). We recommend checking the inside of the top-right drawer first, then the drawer slides and back panel.

Where to look first (fast checklist)

• Inside the top-right drawer on a sticker or label
• Inside the top drawer along the side wall
• On the cabinet frame behind a drawer (remove the drawer and look at the inner side panel)
• Along the drawer slide rails or the metal cross brace near the top
• On the back panel near the upper corners
• On the underside of the top lid (if your chest has a top compartment)

Model number vs. lock code (they are different)

The number stamped on the front of the lock is typically a key/lock code, not the tool chest model number. Use the model number (like 706597440) when searching diagrams and replacement parts.

What you found	What it usually means	What to use it for
Model number label (example: 706597440)	Identifies the exact tool chest	Finding correct parts and fit
Lock number stamped on the lock	Identifies key series or lock type	Matching a replacement key/lock

Why it matters

Craftsman tool chests can look similar across multiple series, but drawer hardware, slides, locks, and trim can vary. Using the exact model number helps us match the right tool storage parts the first time.

If the label is missing or unreadable

• Check for a second label on the back or inside the cabinet frame
• Look for a partial imprint where a sticker used to be (a flashlight helps)
• Search by model number on Sears PartsDirect to confirm you are viewing the correct Craftsman tool chest parts list

Last updated: February 2026

Some Craftsman tool chests, including model 706597440, may be sold with a limited warranty, but “lifetime warranty” is not a universal promise for every Craftsman toolbox. The exact coverage depends on the specific product line and the warranty terms that came with your purchase.

What “lifetime warranty” usually means (and what it usually does not)

When you see “lifetime,” it typically applies to a defined scope, not every part of the toolbox.

• It may cover defects in materials or workmanship, not normal wear.
• Drawer slides, casters, locks, keys, and finishes are often treated differently than the cabinet shell.
• Rust, dents, scratches, and cosmetic issues are commonly excluded.
• Proof of purchase and the original owner requirement are common.
• Commercial use can change coverage compared to home use.

Quick checks to identify your warranty type

Use these practical checks to match your Craftsman tool chest to the correct warranty terms.

• Look for a warranty statement on the original receipt, packaging, or included paperwork.
• Check the model and any series identifiers on the ID label (model 706597440 plus any additional codes).
• Note where and when you bought it; warranty programs can vary by retailer and time period.
• Identify the failed area (casters, drawer slide, lock, handle, lid); coverage often differs by component.

Common toolbox issues and typical warranty treatment

Issue	Typical cause	Often covered?
Drawer won’t close smoothly	Slide wear, debris, bent rail	Sometimes
Caster wobbles or breaks	Overload, impact, fastener loosening	Sometimes
Lock won’t turn	Misalignment, damaged cylinder	Sometimes
Rust or finish peeling	Moisture, chemicals, abrasion	Usually not

Why it matters

Tool chests are a mix of structural panels and wear components. Warranty terms often protect against manufacturing defects, while high-load parts like casters and drawer slides can be treated as maintenance items depending on the plan.

For help identifying the correct coverage language and finding replacement parts by model number, use how to find your appliance model number (and what it means for parts).

Last updated: February 2026

Yes. On a Craftsman tool chest like model 706597440, you can remove the drawers so the box is lighter and easier to move; most drawers come out by fully extending them and releasing the slide locks (or tabs) on each side.

How to remove the drawers (typical Craftsman slide style)

• Empty the drawer first; tools add a lot of weight and can shift.
• Pull the drawer all the way open until it stops.
• Look along both drawer slides for release levers or locking tabs.
• Press the left and right release at the same time (often one side pushes up while the other pushes down).
• While holding the releases, pull the drawer straight out and support the front so it does not drop.
• Set the drawer on a flat surface to avoid bending the slides.

Moving the tool chest safely after drawer removal

Removing drawers lowers the center of gravity and reduces strain on the cabinet rails.

What you are moving	Best practice	Why it helps
Top chest (if stacked)	Separate from the bottom cabinet first	Prevents tipping
Rolling cabinet	Lock casters (if equipped) before lifting drawers out	Keeps it from rolling
Cabinet over thresholds	Push from the lower frame, not the drawer fronts	Avoids slide damage

Common issues and quick fixes

• Drawer will not release: Check for a second stop clip near the back of the slide; fully extend again and re-try the levers.
• Drawer binds halfway out: Look for a bent slide member; gently realign before forcing.
• Hard to reinstall: Extend the cabinet-side slides fully, then align both sides and push in evenly until you feel the stops engage.

Why it matters

Drawer slides are designed to carry weight when aligned. Removing drawers before moving helps prevent racking the cabinet, bending slides, and creating drawers that never glide smoothly again.

For more DIY basics that help with projects like this, see must have tools for appliance repair.

Last updated: February 2026

Yes. Many Craftsman tool boxes and tool chests are made in China, and Craftsman also sources tool storage products from multiple countries depending on the item and production run. For Craftsman tool chest model 706597440, the sure way to confirm is the country-of-origin marking on the product label or packaging.

Where to check on a Craftsman tool chest

Look for a manufacturing label or stamp in these common spots:

• Inside the top lid (upper left or right corner)
• On the back panel near the bottom edge
• Inside a drawer side wall or drawer cavity
• On the underside of the top chest (if it is a stackable set)
• On the original carton or packing slip (if you still have it)

What the label usually tells you

Country-of-origin markings are typically printed in one of these formats:

What you might see	What it means
“Made in China”	Manufactured in China
“Made in USA”	Manufactured in the United States
“Made in USA with global materials”	Assembled in the U.S. using domestic and imported components
“Made in (country name)”	Manufactured in the listed country

Why it matters

Country of origin does not determine whether the tool chest fits your needs, but it can matter for matching finish, drawer slide style, lock hardware, and replacement key or lock-cylinder compatibility when you are servicing a specific production run.

If you are trying to match parts or hardware

For the best match, we use the model number plus the label details.

• Confirm the model number is 706597440 on the label
• Write down any additional numbers (often a serial or production code)
• Note the drawer count and whether it is a top chest, rolling cabinet, or combo
• Compare your measurements (drawer width, slide length, lock location)
• Use how to find your appliance model number (and what it means for parts) to capture the exact model/label information needed for parts lookup

Last updated: February 2026

Pricing for the Craftsman tool chest model 706597440 changes based on the seller listing, promotions, and delivery method. To get the correct current price, match the model number on your chest to the listing details, then compare the item price plus delivery or pickup costs.

How to make sure you are pricing the exact tool chest

Use these checks so you do not compare a similar looking Craftsman chest:

• Match the model number: 706597440 on the ID label (commonly inside a drawer, on the back, or near the lock area).
• Confirm it is a middle tool chest (not a top chest or rolling cabinet).
• Verify 3 drawers and the 26-inch class size in the product title or specs.
• Check whether keys/lock and drawer liners are included.
• Compare delivery vs. store pickup; freight can change the total significantly.

What changes the total cost most often

Cost item	What to compare	Why it matters
Base price	Listed item price	Biggest driver of total cost
Delivery/freight	Delivery fee, liftgate, appointment	Heavy items often add fees
Promotions	Sale price, coupon rules	Discounts can be time-limited
Condition	New vs. open-box	Missing keys or hardware affects value

Why it matters

Craftsman tool storage has many similar 26-inch, 3-drawer chests; matching 706597440 prevents pricing the wrong product and helps you avoid buying parts or accessories that do not fit.

For broader searching by model number and to compare current listings, use Sears PartsDirect.

Last updated: February 2026