Craftsman 48624331 32" spiker/spreader Parts

For your Craftsman 48624331 32-inch spiker/spreader, you can get replacement parts through Sears PartsDirect and other Craftsman parts retailers; the key is matching the exact model number (48624331) so hardware and assemblies fit and function correctly.

Best places to buy Craftsman parts

• Sears PartsDirect (model-based diagrams and model-matched parts)
• The official Craftsman parts channels (online)
• Major home improvement retailers that carry Craftsman parts
• Authorized service centers and local small-engine or lawn equipment shops
• Reputable online parts sellers (use the model number to confirm fit)

Use your model number first (it prevents wrong-part returns)

The Craftsman 48624331 parts list includes many similar-looking fasteners and assemblies. Before ordering, confirm the model number and then cross-check the part description in the 48624331 owner's manual.

Common examples for this model

What you need	Example part on this model	What it does
Wheel issue (wobble, damage)	Wheel assembly 47961	Supports the unit and drives consistent ground contact
Spreading/aerating not consistent	Agitator 24739	Helps keep material moving so flow stays even
Hitch connection hardware	Hitch pin 47623	Secures the attachment to the tractor hitch

Why it matters

Using the correct model-specific part keeps your 32-inch spiker/spreader operating safely and prevents premature wear from mismatched hardware (washers, nuts, shafts, and discs that look alike but fit differently).

Last updated: February 2026

On a Craftsman 48624331 32" spiker/spreader, the model number is printed on the product ID label attached to the frame or hopper area. Once you locate the label, match the full number exactly (including any dashes or extra digits) before ordering parts.

Where to look on the attachment

Check these common label locations first:

• Left or right side rail of the frame near the hitch bracket
• Underside of the hopper or on a hopper support bracket
• Near the axle/wheel area on the main frame tube
• Close to the control/adjustment linkage (if equipped)

What the label may show

Label field	What it means	Example
Model number	Identifies the exact attachment version	48624331
Serial number	Production identifier	Varies
Brand	Manufacturer/brand family	Craftsman

Tips to make sure you have the right number

• Wipe dirt off the label; use a flashlight to read faded print.
• Write the number down exactly; avoid using only the attachment description (like “spreader”).
• If the label is missing, use the exploded views and hardware list in the owner's manual to match major components.
• When ordering, confirm the part fits your model; common items include Craftsman lawn tractor lawn spreader attachment wheel assembly 47961 and lawn tractor spike aerator attachment hitch bracket 23981BL1.

Why it matters

Small design changes can affect fit for shafts, wheels, and hitch hardware. Using the correct model number helps ensure parts like a wheel assembly, hitch bracket, or spike components install correctly and the attachment tracks and spreads evenly.

Last updated: March 2026

A Craftsman 48624331 32" spiker/spreader typically lasts 8 to 12 years with normal seasonal use and basic maintenance. Lifespan depends most on storage (kept dry), corrosion control, and replacing wear items like wheels, chains, and spike components as needed.

What affects lifespan the most

• Moisture and fertilizer exposure: salt and fertilizer dust accelerate rust.
• Storage: covered, dry storage prevents corrosion and seized hardware.
• Load and terrain: overloading and rough ground increase stress on the drive and spike assemblies.
• Cleaning after use: rinsing and drying reduces buildup that binds moving parts.
• Timely small-part replacement: worn fasteners and pins cause misalignment and extra wear.

Maintenance checklist (keeps it running longer)

• Rinse off product residue; dry the hopper and frame after each use.
• Check wheel and axle/spike shafts for wobble; tighten loose hardware.
• Lubricate moving joints lightly; avoid getting oil on areas that should grip.
• Inspect the chain and connector for stretch or binding.
• Replace bent cotter pins and worn hitch pins before they fail.

Common wear items for this model

Area	What you notice	Example replacement part
Drive/chain	Skips, binds, uneven spread	Lawn spreader chain with connector 47960
Spiking	Poor penetration, wobble	Lawn tractor spreader attachment spike disc 28606
Hitching	Excess play, disconnect risk	Lawn tractor attachment hitch pin 47623

Why it matters

A spiker/spreader that rolls smoothly and drives consistently applies seed, fertilizer, or ice melt evenly; that protects your lawn and prevents wasted material. Following the lubrication, cleaning, and adjustment steps in the owner's manual also reduces premature wear on shafts, discs, and hardware.

Last updated: March 2026