View engine
What engine is on a Craftsman edger?
For Craftsman lawn edger model 536772210, the exact engine make and displacement depend on the engine model installed on your specific unit; Craftsman commonly paired these edgers with small 4-cycle gasoline engines in the roughly 3 to 5 HP (about 140cc to 190cc) range.
How to identify the engine on your 536772210
Look for the engine ID on the engine itself (not the edger frame). Common locations include the recoil starter housing, valve cover, or a label near the muffler.
- Find the engine brand (often Briggs & Stratton, Tecumseh, or similar)
- Record the engine model number and type (sometimes “Model / Type / Code”)
- Note whether it is 2-cycle or 4-cycle (most are 4-cycle)
- Check the shaft orientation (horizontal shaft is common on belt-driven edgers)
- Use the engine model to match tune-up parts like spark plug, air filter, and carburetor kit
Quick engine comparison (what you will typically see)
| What you see on the engine | What it tells you | Why it matters |
|---|---|---|
| “Model / Type / Code” format | Often Briggs & Stratton style ID | Best for ordering engine parts |
| Displacement listed in “cc” | Engine size | Helps compare power and torque |
| “4-cycle” marking or oil fill cap | 4-cycle engine | Confirms you do not mix oil in fuel |
Why it matters
The engine model determines the correct maintenance parts and settings (spark plug type and gap, air filter style, carburetor adjustments, and fuel recommendations). Using the right engine ID prevents ordering the wrong tune-up parts.
Related edger parts that affect performance
If the engine runs but the blade does not drive well, the issue is often in the drive and control hardware, not the engine.
- Inspect the belt for glazing, cracking, or stretching; replace with v-belt 32668MA if worn
- Verify the blade engagement/control linkage moves freely; check control rod 740144E701MA
- Confirm the operator control bar returns smoothly; inspect bail 337744MA
- Check fasteners and spacers for looseness that can cause slipping or misalignment
Last updated: February 2026
What size blade is a Craftsman 536772210 edger?
For the Craftsman lawn edger model 536772210, blade diameter varies by the exact blade installed and any prior replacements. The most reliable way to get the correct size is to measure your current blade and match the mounting hardware so the replacement fits and runs true.
How to measure the blade on model 536772210
- Disconnect the spark plug wire and let the engine cool completely
- Clean the blade so you can see the outer edge clearly
- Measure straight across the blade from tip to tip (this is the diameter)
- Measure the center mounting hole diameter (this must match)
- Note blade thickness and whether it is a single-edge or dual-tip style
What to match besides diameter
A blade that is the right diameter but the wrong mounting stack can wobble or loosen.
| What to match | Why it matters | Where to check |
|---|---|---|
| Center hole size | Ensures the blade seats on the arbor | Measure the hole and arbor |
| Thickness | Prevents clamp load issues | Measure with calipers or compare to old blade |
| Hardware order | Keeps the blade aligned | Rebuild the stack in the same order |
| Rotation direction | Maintains proper cutting | Compare bevel and cutting edge orientation |
Parts commonly involved at the blade mount
These model-matched parts are often used in the blade clamping stack or nearby hardware; replace worn pieces when you replace the blade.
- Washer blade 22265MA (blade washer used to space and clamp the blade stack)
- Spring washer 20X3MA (helps maintain tension so fasteners resist loosening)
- Nut 46023MA (retaining nut used on applicable assemblies)
Why it matters
Correct blade size and correct mounting hardware reduce vibration, protect the spindle, and help your Craftsman 536772210 cut a clean, straight edge without loosening fasteners.
Last updated: February 2026
Where can I buy Craftsman replacement parts?
You can buy replacement parts for your Craftsman lawn edger model 536772210 from the model-specific parts list on Sears PartsDirect. For the best fit, always shop by the full model number and match the exact part ID or part number.
Best places to buy Craftsman parts
- Order from the 536772210 parts list on Sears PartsDirect
- Use the model number 536772210 to match the correct diagrams and part IDs
- Compare the part name, part ID, and part number before checkout
How we recommend matching the right part
Use this checklist before you buy:
- Confirm the model number is 536772210 (not just “Craftsman edger”)
- Match the part ID first when available (most precise)
- Cross-check the manufacturer part number on the listing
- Compare the part name and where it installs on the edger
- Replace worn fasteners in sets when it affects alignment or clamping force (nuts, bolts, washers)
Examples of model-matched parts for Craftsman 536772210
If you are replacing common wear or hardware items, these are examples of parts listed for this model:
| What you are replacing | What to match on the listing | Why it helps |
|---|---|---|
| Drive belt | Part ID and belt type | Prevents slipping and poor blade drive |
| Depth/adjustment linkage | Part ID and linkage name | Restores consistent edging depth |
| Nuts/bolts/washers | Thread size and part ID | Avoids loosening and misalignment |
Why it matters
Craftsman outdoor power equipment often has multiple versions that look similar. Ordering by model 536772210 and matching the exact part ID reduces returns and helps your edger run safely and smoothly.
Last updated: February 2026
