Craftsman 113199200 10" radial saw Parts

Common radial arm saw problems on the Craftsman 113199200 are inaccurate cuts (0° or 45° miter), looseness or play in the arm, column, or carriage, and unsafe operation issues like kickback risk when ripping. Our best fix is to follow the alignment, lock, and guard setup steps in the owner's manual.

Most common issues (and what they usually point to)

• Cuts not accurate at 0° or 45°: looseness between the column tube and column support, arm not indexing properly, or crosscut travel out of adjustment.
• Arm will not index or hold position: arm control lever not locking fully, or wear-related lock adjustment needed.
• Carriage feels loose on the arm: carriage assembly or bearings need adjustment.
• Kickback risk when ripping: guard, spreader, and anti-kickback device not positioned correctly.
• Unsafe “walk-away” hazard: tool left running or boards removed before the blade fully stops.

Quick checks we recommend before you adjust anything

1. Unplug the saw before troubleshooting, alignment, or guard changes.
2. Verify there is no play in the column and column support before starting work.
3. Confirm the carriage lock is used correctly (locked for ripping; set before moving the saw).
4. For ripping, confirm the saw is set up to the manual’s requirements.

Ripping setup requirements (from the manual)

Requirement	Correct setup	Why it matters
Carriage lock knob	Locked	Prevents carriage movement during rip cuts
Radial arm position	Locked at 0°	Keeps the cut straight and reduces binding
Guard/spreader/AKB	Properly set	Helps reduce kickback

Why it matters

Most “problem” symptoms on a radial arm saw are really alignment or locking issues. Fixing looseness and indexing improves accuracy, and correct guard and anti-kickback setup reduces the chance of binding and kickback during ripping.

Last updated: February 2026

Yes. A Craftsman radial arm saw like model 113199200 can be worth real money if it is complete, runs smoothly, and still cuts accurately; value drops fast when key safety parts, guards, or table components are missing or the motor has issues.

What drives the value most

• Completeness: guard, spreader, anti-kickback pawls, fence and table boards
• Condition: smooth carriage travel, tight arm/yoke locks, minimal play
• Accuracy: the arm and yoke index and lock consistently at common positions
• Motor health: starts quickly, no burning smell, no excessive sparking at brushes
• Safety and usability: switch works correctly (including the key), cord and grounding are intact

Quick condition checks (before you price it)

Use these checks from the saw’s normal setup and operating habits:

• Lock the carriage lock knob and confirm it holds firmly
• Verify the arm indexes cleanly at 0° and 45° left and right, then locks securely
• Confirm the yoke indexes at 90° positions and the yoke lock holds
• Inspect the guard, spreader, and anti-kickback assembly for damage and correct positioning
• Make a test crosscut; return the carriage fully rearward and let the blade stop before moving the work

For model-specific control locations and safe operating steps, use the 113199200 owner's manual.

Typical value ranges (what most buyers pay)

These are common market ranges for 10-inch radial arm saws in working order; local demand and included accessories can move the number up or down.

Condition	What it usually includes	Typical range
Parts-only	Missing guard/table, motor issues	Low
Working, basic	Runs, complete enough to use safely	Medium
Clean, tuned	Accurate indexing/locks, well-maintained, complete	Medium-high

Why it matters

Radial arm saws can do accurate crosscuts, miters, bevels, and some ripping, but buyers pay for a saw that locks and indexes correctly and has the guard and anti-kickback components set up properly. That combination affects both cut quality and safe operation.

Last updated: February 2026

You can buy replacement parts for your Craftsman radial arm saw model 113199200 directly through our parts listings and diagrams, using the model number to match the correct components. For model-specific part identification, use the exploded views and parts lists in the 113199200 owner's manual.

Best way to get the right part for model 113199200

Because older power tools often have multiple versions, we recommend matching by model number and the exact part description from the parts list.

• Confirm the model number on the saw (the manual notes it’s found at the front of the base)
• Use the parts list and figure callouts (for example, arm assembly and guard assembly)
• Match the key number in the diagram to the part number in the list
• If hardware is listed as “standard hardware,” buy it locally by size and type
• Record the serial number too; it helps confirm the correct variation

What you can expect to find in the manual

The Craftsman manual for this saw includes repair parts lists for model 113199200 (and related configurations), plus safety and operating guidance.

What you need	Where to look	Why it helps
Model and serial number location	Front of the base	Confirms you are ordering for the correct saw
Exploded parts diagrams	Repair parts section	Shows how assemblies fit together
Part numbers and descriptions	Parts list tables	Lets you match the exact component
Standard hardware notes	Parts list footnotes	Tells you which items are generic

Why it matters

Ordering by the exact Craftsman 113199200 parts list prevents fit issues and avoids buying the wrong guard, arm components, or fasteners for a similar-looking 10-inch radial saw.

Last updated: February 2026

Craftsman radial arm saws like model 113199200 were primarily produced and sold through the late 1950s into the early 1990s; most 10-inch models were no longer sold new by about 1992, with a few smaller variants lingering into the mid-1990s. For model-specific identification details, use the 113199200 owner's manual.

What you can use to date a Craftsman radial arm saw

We use a few practical clues to narrow down the era for a Craftsman 10-inch radial saw:

• Model number format: Many classic Craftsman saws use the 113.xxxxxx format.
• Parts list style: Older manuals often include long “repair parts” tables and “standard hardware” notes.
• Guard and switch design: The manual for this saw shows a dedicated guard assembly and locking switch parts list.
• Manual printing and part number: Manuals often list a printed manual part number (helpful for cross-referencing).
• Where it was sold: These were commonly sold through Sears catalogs and stores.

Where to look on the saw for date clues

If you want a tighter estimate than “late 1950s to early 1990s,” check these spots:

• The model and serial tag on the saw’s arm or base
• The motor nameplate (sometimes includes a date code)
• The switch housing area (labels can change by era)
• Any original paperwork (receipt, warranty card, manual revision)

Quick guide: what each clue tells you

Clue	What it helps confirm	What it does not confirm
Model number (113199200)	Product family and parts breakdown	Exact build year
Serial number	Production batch timing	Retail sale date
Manual version	Approximate era of documentation	Whether the saw was purchased new

Why it matters

Knowing the approximate production era helps you match the correct guard components, arm assembly hardware, and other repair parts when you service alignment, cleaning, or safety-related assemblies described in the manual.

Last updated: February 2026

There is no single “best” brand for every shop; the best radial arm saw is the one that stays accurate, has solid guarding, and has parts support for the way you use it. For a Craftsman 113199200 10-inch radial saw, we focus on safe setup, correct indexing, and keeping the arm and yoke adjustments tight using the procedures in the owner's manual.

What to look for in a “best” radial arm saw brand

When we compare brands (including vintage saws), these factors matter more than the badge:

• Accuracy and repeatability: arm miter indexing at 0° and 45° should lock consistently.
• Guarding and safety design: lower guard should move freely and return reliably.
• Adjustment support: clear procedures for alignment, wear compensation, and calibration.
• Parts availability: common wear items and hardware should be obtainable when needed.
• Build and stability: a rigid stand or bench mounting reduces flex and improves cut quality.

How Craftsman 113199200 fits into the decision

Your Craftsman 113199200 is a classic 10-inch radial saw design with defined controls and indexing methods. The manual emphasizes an “index in one direction” habit (go slightly past the setting, then return to index and lock) to improve accuracy and reduce stress on components. That technique is a big reason experienced users get excellent results from this style of saw.

Quick comparison: what “best” means by use case

If you mainly do...	Prioritize...	Why it matters
Crosscuts and dados	Smooth carriage travel, solid arm lock	Cleaner cuts, less drift
Occasional miters	Positive miter indexing and tight locks	Repeatable angles
Rip cuts (where applicable)	Guarding, anti-kickback setup, fence condition	Safer feeding and control

Why it matters

Radial arm saw performance is mostly about setup and maintenance. Even a top-tier brand will cut poorly if the arm lock, indexing, or guarding is out of adjustment. Following the alignment and control procedures for your specific saw keeps cuts accurate and helps prevent binding and kickback.

Last updated: February 2026