Gentron Gas pressure washer Parts — Browse All Models

What to do when your Gentron gas pressure washer won't mix detergent with spray

Using the wrong spray tip to apply detergent can prevent the detergent from mixing properly with the spray. Use the low-pressure spray tip (usually the black tip) when applying detergent.

A clog in the detergent siphon tube can also inhibit proper detergent mixing. Check the siphon tube for a clog and clean the tube if necessary.

If the siphon tube is clear, then you'll likely need to replace the chemical injection valve on your pressure washer using a chemical injection valve replacement kit.

Common replacement parts for Gentron gas pressure washers

• Unloader valve. When you let go of the trigger on the wand, the unloader valve opens to recirculate pressurized water to the pump, so the water won't overhead and damage the pump. If the unloader valve clogs or won’t open, the thermal release valve opens and sprays steamy water from the pump. Conversely, if the unloader valve won’t close, water pressure to the spray nozzle decreases drastically. If the pressure washer unloader valve isn’t working, replace it.
• Thermal relief valve. The thermal relief valve protects the pump from overheating. If the spray wand is unused for more than 5 minutes while the pump is running, the pressurized water heats up quickly. If the water gets too hot, the thermal relief valve opens to prevent damage to the pump. The thermal relief valve closes once the water temperature is cooler.
• Spray tip. The spray tip connects to the end of the spray wand. The spray tip restricts water flow and creates a spray pattern. An assortment of spray tips is usually provided with the pressure washer.
• Pressure hose. The pressure hose connects the pump to the spray wand. The pressure hose carries the pressurized water safely from the pump to the spray wand.