Can’t find your part?   Contact us:+1-309-603-4777
Sears Parts Direct
Tips to find your model number
Orders

  • Keep track of the models you own in your profile

    Sign in or Register to view or add models

Schedule a repair
WC Wood Upright freezers

Official WC Wood upright freezer parts

WC Wood upright freezers keep all of your foods solidly frozen. Dependable controls and sturdy compressors used on WC Wood upright freezers give you the peace of mind that your frozen foods will stay fresh and safe. When your WC Wood freezer stops cooling, find the repair parts that you need to fix the problem at Sears PartsDirect.

Replacing the compressor start relay on your WC Wood upright freezer

  • Unplug the freezer or shut off the circuit breaker for the freezer to disconnect electrical power.
  • Remove the screws securing the machine compartment cover to the freezer cabinet. Remove the machine compartment cover.
  • Squeeze the wire harness plug to release the locking tabs and remove the wire harness from the compressor start relay.
  • Release the wire retainer from the compressor start relay. Grasp the compressor start relay firmly and pull it out of the connection terminals on the compressor.
  • Position the new compressor start relay next to the compressor and line up the terminal prong connections. Push the compressor start relay onto the compressor terminal prongs. Reinstall the wire retainer on the start relay.
  • Push the wire harness plug into the start relay. Make sure that the locking tabs snap into place.
  • Reinstall the machine compartment cover.
  • Plug in the freezer or turn on the house circuit breaker to restore electrical power.

Common WC Wood upright freezer replacement parts

  • Control panel. The freezer control panel turns on or off freezer functions such as power, vacation mode and the ice maker.
  • Drain hose adapter. The drain hose adapter provides a connector to attach a drain hose to the freezer.
  • Thermistor. The thermistor is a temperature sensor within the freezer that sends information to the electronic control board.
  • Temperature control thermostat. The temperature control thermostat is mounted in the control housing area and controls the temperature inside the freezer. It turns the compressor on and off as needed to maintain the set temperature in the freezer. The thermostat has a temperature sensor tube that detects the actual temperature in freezer compartment and controls the temperature based on the reading from that sensor.
  • Overload/PTC relay. The overload/PTC relay starts the compressor motor. It has 2 components: an overload protector that trips when the compressor motor overheats or locks up, and a relay. The relay manages the start-up of the compressor and keeps the compressor running until the compressor cycles off.

Parts & More