Magic Chef Electric wall oven Parts — Browse All Models

Replacing the broil element in your Magic Chef electric wall oven

• Shut off the circuit breakers for the wall oven to completely disconnect electrical power.
• Open the oven door and remove the oven racks. Remove the broil element mounting screws. Remove the broil element support mounting screws and remove the supports. Carefully pull the broil element forward to expose the wires connected to the back of the element. Disconnect the wires, taking care not to let the wires slip through the holes at the back of the oven. If the wires slip through the holes, you’ll need to pull the oven out of the cabinet and remove the back cabinet panel to retrieve them. Use pliers to pull the wires off the broil element if necessary. Remove the broil element.
• Connect the wires to the broil element. Push the ends of the broil element through the holes in the oven cavity and reinstall the mounting screws. Reinstall the broil element supports and secure them with the mounting screws. Reinstall the oven racks and close the oven door.
• Reset the house circuit breakers for the wall oven to restore electrical power to the appliance.

How to replace the oven door handle on your Magic Chef electric wall oven

• Open the oven door and remove the screws that secure each side of the oven door handle to the oven door.
• Position the new oven door handle on the front of the oven door and line up the mounting screw holes with the mounting holes in the oven door.
• Insert the oven door handle mounting screws through the oven door and into the new door handle then tighten the oven door handle mounting screws firmly.
• Close the oven door.