Poulan Electric line trimmer Parts — Browse All Models

What to do when line won't advance on your Poulan electric line trimmer

• Unplug the line trimmer power cord to disconnect electrical power from the trimmer.
• Remove the cutting line spool cap and pull out the cutting line spool. Check the line wound on the spool and rewind the spool if cutting line is bound up or not wound on the spool properly.
• Properly route the cutting line through the cutting head so line feeds out freely through the spool and cutting head.
• Clear dirt and debris from the spool and cutting head that could be preventing line from advancing.
• Check all cutting head components for damage and wear. Replace any worn or damaged cutting head parts.

Safety precautions to take when using your Poulan electric line trimmer

• Dress properly when using the line trimmer. Wear thick pants and heavy shoes or boots to prevent cuts on legs and feet caused by flying debris.
• Always wear safety glasses or similar eye protection when operating, or performing maintenance on your line trimmer to prevent eye injury.
• Inspect the line trimmer before each use. Tighten any loose fasteners. Replace any worn or damaged parts.
• Check the power cord and extension cord for damage. Repair or replace the power cord or extension cord if damaged.