Official Ryobi power pruner parts

Maintenance tips for your Ryobi power pruner

• Inspect the power pruner before and after each use. Check the pruner closely for damage of guards and safety devices. Replace any damaged parts. Tighten any loose fasteners on the power pruner.
• Never expose the power pruner to rain or water. Keep handles dry, clean and free of oil and grease.
• Keep the power pruner away from heat sources and flames.
• When repairing the power pruner, us only identical, genuine original equipment manufacturer replacement parts.

Adjusting chain tension on your Ryobi power pruner

• Allow the chain to cool down before adjusting chain tension. Wear work gloves to protect your hands when adjusting chain tension.
• Make sure guide bar nuts are only finger tight before adjusting the chain tension.
• Check that the adjusting block is in the oval adjusting hole on the guide bar.
• Turn the adjusting screw clockwise to adjust chain tension. There should be no gap between side links of the chain and the bottom of the guide bar after adjusting chain tension.
• Tighten guide bar nuts firmly.
• Check chain bar tension after a few minutes of use and adjust chain tension again if necessary.