Official Ecodyne iron filter parts

How to fix your Ecodyne iron filter when the display doesn't work

Lack of electrical power, a failed power transformer or a faulty timer can prevent the iron filter display from lighting up.

Check the electrical outlet by unplugging the iron filter and plugging a small lamp or appliance into the outlet to check for power. Reset the house circuit breaker for the outlet if the outlet is dead.

If the electrical outlet is okay, check the transformer wiring connections to the timer (with the transformer unplugged from the electrical outlet). Reconnect any loose wires. If the transformer wiring connections are okay, check the transformer's wires for damage and replace the transformer if you find wiring damage.

If the electrical outlet and transformer are both okay, then you'll likely need to replace the iron filter timer because it's not lighting up the display.

Safety guidelines for using Ecodyne iron filters

• Read all procedures, guidelines and maintenance steps in the owner's manual and installation guide carefully before installing and using the iron filter.
• Don't attempt to use the iron filter to make safe drinking water from non-potable water sources.
• Don't use the iron filter on microbiologically unsafe water or water of unknown quality.
• Check with your local public works department for plumbing and sanitation codes and follow all local codes.