Dremel Power sander Parts — Browse All Models

Top replacement parts for Dremel power sanders

• Gear case needle bearing. The gear case needle bearing attaches in the gear case and allows the output gear to spin smoothly.
• Lock button spring. The lock button spring applies tension to the lock button when the lock button is pushed and raises the lock button when the grinder is unlocked.
• Carbon motor brushes. The carbon motor brushes transfer electric current to the spinning armature in the motor.
• Motor rotor. The drive motor rotor spins to rotate the motor shaft.

Safety tips for your Dremel power sander

• Sanding surfaces covered in lead based paint is not recommended because it's difficult to safely control contaminated dust.
• Keep others away from the work area when sanding and grinding work pieces.
• Wear eye protection and use a dust mask or respirator when sanding and grinding work pieces. Replace the filter on the respirator regularly.
• Wear work gloves to protect your hands when using the power sander.
• Minimize the amount of dust generated when sanding painted surfaces. Use the dust bag to catch dust whenever possible.
• Seal areas being sanded with plastic sheeting to minimize others exposure to dust.