$20.36 |
20% OFF Phone Price : $25.36
CONFIRM THE PART FITS
Part Information
This high-limit thermostat and inlet thermistor (part number WP8577891) is for dryers.
High-limit thermostat and inlet thermistor WP8577891 shuts off the heating element or burner when the dryer overheats. The inlet thermistor monitors the temperature of the inlet air.
Disconnect the power before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $57.00 |12% OFF MSRP : $65.00
- $4.40 |69% OFF MSRP : $14.00
- $52.70 |20% OFF MSRP : $66.00
- $71.19 |7% OFF Phone Price : $76.19
- $224.09 |$10.00 OFF Phone Price : $234.09
- $184.39 |27% OFF MSRP : $253.74
- $88.89 |42% OFF MSRP : $154.55
- $40.28 |11% OFF Phone Price : $45.28
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #MED6600TQ0 Maytag dryer | MED6600TQ0 | Bulkhead parts, optional parts (not included) |
| Model #WED6600VU0 Whirlpool dryer | WED6600VU0 | Bulkhead parts, optional parts (not included) |
| Model #YWED6600WL0 Whirlpool dryer | YWED6600WL0 | Bulkhead parts |
| Model #WED6600VW0 Whirlpool dryer | WED6600VW0 | Bulkhead parts, optional parts (not included) |
| Model #YWED6600VW0 Whirlpool dryer | YWED6600VW0 | Bulkhead parts, optional parts (not included) |
| Model #WED6200SW1 Whirlpool dryer | WED6200SW1 | Bulkhead parts, optional parts (not included) |
| Model #YWED6200SW1 Whirlpool dryer | YWED6200SW1 | Bulkhead parts, optional parts (not included) |
| Model #YMED6600TQ0 Maytag dryer | YMED6600TQ0 | Bulkhead parts, optional parts (not included) |
| Model #YWED6600VU0 Whirlpool dryer | YWED6600VU0 | Bulkhead parts, optional parts (not included) |
| Model #WED6600WL0 Whirlpool dryer | WED6600WL0 | Bulkhead parts |
Reviews
Saved hundreds
Bought used washer/dryer from someone who was told it would cost hundreds to repair dryer. Replaced several parts for under $100 and was using it in no time.
Mike, Maryland
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to install
20 min. To install. Parts as described. Price little high.
Markgee, Indy
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- Less than 30 minutes
Two week repair!
All went well but I should have entered the part number instead of the dryer model number. I didn't need the kit because mine was wired different. All I needed was the high limit thermostat. Trial and error... Now I have a spare high limit kit:)
#JUSTFIXMYDRYER, Midwest
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour