CONFIRM THE PART FITS
Part Information
This motor (part number 0QEF) is for table saws.
Motor 0QEF spins the blade.
Unplug the table saw before installing this part. Wear work gloves to protect your hands.
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #137271180 Craftsman table saw | 137271180 | |
Model #137248880 Craftsman table saw | 137248880 | |
Model #137218251 Craftsman table saw | 137218251 | Body shell/motor/blade |
Model #137218240 Craftsman table saw | 137218240 | Base assy |
Model #137248840 Craftsman table saw | 137248840 | Table saw |
Model #137248101 Craftsman table saw | 137248101 | Saw assy |
Model #137248481 Craftsman table saw | 137248481 | |
Model #137218040 Craftsman table saw | 137218040 | Blade/body shell/motor |
Model #137218250 Craftsman table saw | 137218250 | |
Model #137248830 Craftsman table saw | 137248830 | Blade/motor/body shell |
Reviews
Not an exact fit.
Bolt holes did not line up with new motor bracket. Had to swap new motor v racket with old bracket.
Mike209, Ormond Beach,FL
2 people thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Install
It would have been a 30 - 40 minute install if instructions were included.
Randall, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Not a job for someone with short fingers
Replacement was pretty straight forward. The longest time spent was getting my hand into the tight opening to get to the bolts that hold the motor to the bracket.Had to go to store to get a female spade conector(one wire had one,didn't).
Mike33, Kearney, Mo
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Pricey
Motor housing was cracked when I received it. Needed the part right away so I used the part anyway. Bracket supplied was not the correct one, so I used my old one.
Sharp, WI
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Just what I wanted
Moter was an easy replacement. Took less than 30 mnutes to install. Hope it will last another 16 years like the original one
slimtom, Texas
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Table saw motor
The motor was exactly the same as the one I was replacing. Just had to remove a bracket off the old one because the new one was incorrect. Had the motor changed out in less than an hour.
Rlittle, Rochester, NY
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Craftsman Table Saw Motor
This Craftsman Table Saw Motor was easy to install. Do not throw the old motor and parts out till you get the new one! The only thing I had to change was the bracket on the side of the motor (the new one was not the same) and put a female electrical connector on the white wire. I was impressed that I could still find parts for this my 2003 Craftsman Table Saw, considering it was 15 years old. I like this layout of the saw that I have because of the extensions on both end and the rear of the table. The new saws that are out today do not have that.
Pribs, Fond du Lac Wi
3 people thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Circular saw replacement motor
A mounting bar on the motor was slightly different from the original, but not a problem once discovered.
diyer, Houston
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour