Chainsaw Ignition Module 573992801

Chainsaw no spark problem

First removed damaged parts, the coil and the magnet flywheel was damaged by loosening of the bolts over time, unbolted the coil and loosened nut on flywheel so I could put screwdriver under edge of fly wheel and tapping on nut slightly with hammer to break flywheel loose from shaft,make sure no threads are sticking above nut before hitting with hammer, reinstalled new parts making sure the key way and the key area of the flywheel line up, installed nut and tightened, installed coil and wire clip, the two areas of the coil that line up with flywheel should be spaced evenly and not touching each other, put covers back on and fired it up.