$137.86 |Â
7% OFFÂ Phone Price : $147.86
CONFIRM THE PART FITS
Lawn & Garden Equipment Engine Starter Pinion Gear (replaces 693058, 693059, 75264) 695708
Part #695708
Online Only Price
$8.45 |Â
11% OFFÂ Phone Price : $9.45
In Stock
For ZIP codes near Edit
This part fits
Part Information
This starter pinion gear (part number 695708) is for lawn and garden equipment engines.
Starter pinion gear 695708 attaches to the starter clutch drive and engages the flywheel to start the engine.
Let the engine cool before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $8.99 |Â10% OFFÂ Phone Price : $9.99
- $14.06 |Â12% OFFÂ Phone Price : $16.06
- $11.34 |Â15% OFFÂ Phone Price : $13.34
- $9.89 |Â9% OFFÂ Phone Price : $10.89
- $30.02 |Â14% OFFÂ Phone Price : $35.02
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #198707-0141 Briggs & Stratton lawn & garden engine | 198707-0141 | Starter motor |
| Model #460707-2637-E1 Briggs & Stratton lawn & garden engine | 460707-2637-E1 | All parts |
| Model #461707-0145-E3 Briggs & Stratton lawn & garden engine | 461707-0145-E3 | All parts |
| Model #460707-2637-E3 Briggs & Stratton lawn & garden engine | 460707-2637-E3 | All parts |
| Model #580326510 Craftsman generator | 580326510 | Starter motor |
| Model #9010-0 Generac generator | 9010-0 | V-twin engine |
| Model #9010-3 Generac generator | 9010-3 | Engine parts |
| Model #580326011 Craftsman generator | 580326011 | Starter |
| Model #401700 TO 401799 (0138-01 - 0138-01 Briggs & Stratton lawn & garden engine | 401700 TO 401799 (0138-01 - 0138-01 | Alternator & starter motor group |
| Model #401400 TO 401499 (0010 - 0013) Briggs & Stratton lawn & garden engine | 401400 TO 401499 (0010 - 0013) | All parts |
Reviews
Luckily they are still available
Good that these parts are still available to rebuild the stater. Wish whole assembly was still available so that you won't be forced to buy a new starter.
Larry, Portland OR
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Very pleased
Exactly what I needed. And videos made repair easy. Thanks!
Rufus, La.
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Most DIYers Can Intall This
Exact fit part, no problem there. Plastic gear teeth engaging with metal flywheel teeth is an odd design but mine lasted over 15 years. Need to remove some engine cowling to get to the starter bolts. C-clip ring holding the top cap on the pinion gear assembly is tricky. You'll need to apply enough downward pressure on the top cap to flatten the spring washer underneath while prying the C-clip out of the groove it sits in. Do this before loosening the starter motor from the engine. Pinion gear is a quick swap out but pay attention which side is up when disassembling. Maybe mark the top with a Sharpie before removal. Once new part is installed, probably better not to lube with anything heavier than WD-40, if at all, as gear needs to slide down the spindle quickly once the engine turns over. Button it all up and go cut some grass.
archer52dhm, Greater Cleveland, OH
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
bendix gear
worked perfect. it would be good to include a new C-clip with gear.
jimbo, nyny
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Difficult it took hours
Very hard to get at the starter. Had to pull flywheel which took special tool. Once I was there replacing the gear went ok. Very time consuming.
Vin74, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Easy to install
Only took 5 minutes to install the part once I received it
Toke, Wisconsin
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Have what I need every time
Starter gear pinion broke and needed a replacement quickly. I ordered with next day shipping and had them in two days. Knew the delivery date so had the motor already disassembled so when the part showed up I was able to get it installed and back together in less than an hour and a half. I ordered two gears and retainer clips so that I had a spare on hand. Great service.
RB51, Moscow, Idaho
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
Starter part replacement
It took about an hour to get the starter out, 10 minutes to install the gear, and another hour to install the starter and sheet metal.
WJKa, Ca.
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour