CONFIRM THE PART FITS
Part Information
This hand wheel (part number 2RVH) is for table saws.
Hand wheel 2RVH adjusts the blade height or angle when you turn it.
Follow the instructions in the owner's manual when installing this part.
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #137054450 Craftsman table saw | 137054450 | Saw asy |
Model #137218073 Craftsman table saw | 137218073 | Saw table |
Model #137218071 Craftsman table saw | 137218071 | Base assy |
Model #137218070 Craftsman table saw | 137218070 | Base assy |
Model #137218072 Craftsman table saw | 137218072 | Body/blade |
Reviews
Slow
Easy but part should be at least a white metal casting. Low grade plastic on a contractor level saw.
Slow, Nh
2 people thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Table saw wheel
Very easy to install, less then 15 minutes. Wish all repairs were this easy.
Rosey 5, Cedar Rapids, IA
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Real easy if you first look at your saw schematic.
Tools - vise grips & socket. Invert table saw. Remove decal from outside centre of wheel. See the nut. Hold shaft to nut with vise grips and remove nut. Push wheel inwards (shaft will protrude through wheel, give a half turn to align the shaft pin to the open slot, pull wheel off. Reverse procedure to install new wheel. If you had kept the table saw worm gear mechanism clean and dry lubricated, you wouldn't be putting a new wheel on. This is a plastic wheel and will not stand up to hard treatment. Cheers.
DH43, Penticton, British Columbia, Canada
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour