CONFIRM THE PART FITS
Part Information
This recirculation pump (part number WP2313628) is for ice makers.
Recirculation pump WP2313628 circulates water over the evaporator plate to form a slab of ice that's then cut into cubes.
Disconnect the power before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $71.45 |10% OFF MSRP : $79.00
- $50.37 |10% OFF MSRP : $56.00
- $142.49 |7% OFF Phone Price : $152.49
- $53.72 |21% OFF MSRP : $68.00
- $34.49 |13% OFF Phone Price : $39.49
- $41.07 |11% OFF Phone Price : $46.07
- $44.15 |10% OFF Phone Price : $49.15
- $207.24 |10% OFF MSRP : $230.00
- $50.21 |9% OFF Phone Price : $55.21
- $166.90 |21% OFF MSRP : $210.00
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #GI15NFLTB2 Whirlpool freestanding ice maker | GI15NFLTB2 | Pump parts |
Model #KUIC18PNTS2 KitchenAid freestanding ice maker | KUIC18PNTS2 | Pump parts |
Model #KUIC15PRTS1 KitchenAid freestanding ice maker | KUIC15PRTS1 | Pump parts |
Model #GI15NDXTQ1 Whirlpool freestanding ice maker | GI15NDXTQ1 | Pump parts |
Model #KUIC15PLXS0 KitchenAid freestanding ice maker | KUIC15PLXS0 | Pump parts |
Model #10689582705 Kenmore freestanding ice maker | 10689582705 | Pump parts |
Model #GI15NFLTS0 Whirlpool freestanding ice maker | GI15NFLTS0 | Pump parts |
Model #KUIS18PNXW1 KitchenAid freestanding ice maker | KUIS18PNXW1 | Pump parts |
Model #KUIS18PNTB4 KitchenAid freestanding ice maker | KUIS18PNTB4 | Pump parts |
Model #GI15NFRTS0 Whirlpool freestanding ice maker | GI15NFRTS0 | Pump parts |
Reviews
Can always count on Sears!
This recirculating pump, works perfectly and fit exactly. My ice makes stopped making ice. Going into service mode, the recirculating pump was not pumping water over the cold plate that creates the ice.
Anthony, Baton Rouge
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Just the part. Nothing else
If you want instructions, schematics, etc you will be disappointed. I was able to install this but only because of the University of YouTube.
NewBrewB, Pace, FL
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Ice maker reservoir pump
Worked well immediately. Easy to install. Make sure that the magnet-rotor is secured to the impeller unlike the case with the broken part that I replaced
Dew I y, Norfolk VA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Time consuming to install but it fixed my problem.
If it won't make ice at all then the problem is most likely the recirculating pump.
Kenny K, Va
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Moderately hard
Follow diagram and be clean 30 minutes to do it its easier if you put the unit on a bench at eye height
Ffej, Austin TX
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour