CONFIRM THE PART FITS
Part Information
Special details: Mandrel shaft 738-1186A doesn't include the bearing; order the bearing for your lawn tractor model separately.
This mandrel shaft (part number 738-1186A) is for lawn tractors.
Mandrel shaft 738-1186A rotates the blade under the mower deck.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $20.34 |20% OFF Phone Price : $25.34
- $112.15 |8% OFF Phone Price : $122.15
- $7.66 |20% OFF MSRP : $9.60
- $23.79 |17% OFF Phone Price : $28.79
- $12.01 |14% OFF Phone Price : $14.01
- $6.58 |13% OFF Phone Price : $7.58
- $19.56 |9% OFF Phone Price : $21.56
- $15.56 |18% OFF MSRP : $19.00
- $69.13 |23% OFF MSRP : $90.00
- $64.52 |10% OFF Was : $71.69
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #13WG91AT056 Cub Cadet front-engine lawn tractor | 13WG91AT056 | 46" deck |
Model #13AX90YT001 MTD front-engine lawn tractor | 13AX90YT001 | 42" deck (manual pto) |
Model #247289060 Craftsman front-engine lawn tractor | 247289060 | 42" deck (manual pto) |
Model #13AX90AS056 Cub Cadet front-engine lawn tractor | 13AX90AS056 | 42" deck |
Model #13AP91AP056 Cub Cadet front-engine lawn tractor | 13AP91AP056 | 46" mower deck (ltx1045) |
Model #13RX91AT056 Cub Cadet front-engine lawn tractor | 13RX91AT056 | 46" mower deck (ltx1045) |
Model #13RX90AS056 Cub Cadet front-engine lawn tractor | 13RX90AS056 | 42" deck |
Model #13AX91AT056 Cub Cadet front-engine lawn tractor | 13AX91AT056 | 46" mower deck (ltx1045) |
Model #13RP91AP056 Cub Cadet front-engine lawn tractor | 13RP91AP056 | 46" mower deck (ltx1045) |
Model #13WX91AT056 Cub Cadet front-engine lawn tractor | 13WX91AT056 | 42" deck |
Reviews
Easy to Install
Even if your not a Machanic? This shaft was easy to install. Both start ends were worn and both were easy to replace.
Doremus, Early texas
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Modification to Star pattern!
The Star pattern of 6 points was not compatible with the original. Therefore the purchase of new blades was an added expense. Shaft fits fine but I purchased replacement blades for 5 Star and had to return them and purchase 6 point which were difficult to find in the quality of my 5 point blades which were quite new.
Evie, Ct
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Part fit perfect
The old shaft was hard to remove due to the mounting nuts, used two 15/16 wrenches, was hard so used pentrating oil to loosen the nut from the threads. It finally came off and the new Mandrel shaft went right in , no problems.
Bob8, Penn Valley, CA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Helpful
I had a problem with my tractor/mower. Sears Parts was so helpful. They helped me to figure out exactly what part I needed. Mower is running fantastic now!
none, North Carolina
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
drive on shaft soft and sheared off
disassemble shaft housing swap out shafts and reassemble.
rbosek, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Perfect directions
It was easy to install due to the easy to understand directions
Horseman2286, Goliad Texas
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Exact Part
It was the Exact part needed , Quick and easy to install.
Donnie 4, Virginia
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Took about an hour to replace
It was easy to install with hand toll that most everyone should have. Removing the mower deck was easy.
JBIII, Pasadena MD
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour